Delete

Personally I think Rick should up his game and make them...

Vibrating seat risers, yanno, like the vibrating beds back in the hotels that took a quarter to operate. Imagine that plus the heated seats...and a revenue generator for the truck owner.


And everyone thought I was gonna suggest Ti...you know who you are!...for shame

 

If they were made from Ti, they could guarantee an orgasm.

 

Please put me down for two pair on the next availability

 

To anyone on the fence hanging around in here playing ! Do it! Pull the trigger! I’ve only had them installed for a day or two but best interior/comfort mod I’ve done!

Thanks again @7r41lbr34k3r

 

Upgraded my spacers from printed to @7r41lbr34k3r :








Much nicer than the old ones and a bit higher.

 

I installed the 1" and they work out good. I think I will order the 1/2" when available and try them and move the 1" to passenger side for my shorter wife

 

I'm boxing up a bunch of shift knob orders as I type this, so I'm almost free to start on these again.

Probably should clean the shop, too ... looks like a tornado ran through here.

 

Let me know, I so need these...

 

woooooo, ready to pull the trigger and get 2 sets of these!

 

Can I get a set for the rear seats only?

 

I wish I found this thread earlier. Interested in a set.

 

Set of rears?

 

I would like to purchase a set of ½" spacers.

 

Same.

 

See page 1 post 1. He will be taking more order on 4.10.19 at noon.

 

I saw that after I posted. Thank you

 

This might be a drunkpost,

Anyone wanting 1.25"+, you don't have to spend a fortune tomorrow to get there if you are patient.

I plan to up my materials inventory to go up to 2" (sans extension), but my need for a roof on my house got in the way. A rather ... complicated roof for such a small house, apparently ... $$$

Maybe I am yelling at a cloud, but aluminum is far too expensive these days ... and these spacers are probably larger/heavier than you might anticipate. Maybe I'll put a banana in the next picture, for scale.

My ultimate goal is to bring 2.5" rise for close to current 1.5" prices. Material prices dictate any more/less than that.

Just trying to be transparent.

 

I'm with you!

Except for that roof part. Fuuuuck!

 

Ugh, hip roof with 4 dormers, 3 chimneys and 2 pipes. Cost me just over 13k in a town that averages half that cost. My house is only 2k sq ft ... :/

Anyone who has my return address from a previous transaction can confirm via Google Earth.

Next is the "hobby shop" which is a separate structure and has a rather steep slate roof that is on its last legs ... FML.

 

Steel roof...yup, more expeez but so worth it. Did mine 9 yrs ago, awesome. I wanted Ti, but I guess I was too far ahead of my time. They didn't do Ti at that time.