Read this thread before installing the Anytime Camera mod, or just don't skim instructions

I was installing the anytime camera mod and a black grill trim ring, and now the truck starts/drives, but I can't roll up my windows or turn on my AC, and the lane departure alert malfunction warning is happening, and pre-collision system malfunction warning is happening. It seems like if anything it should be a fuse but so far the ones I would expect are in good shape. Anyone have ideas? The radio still works.

 

Undo what you did.

 

Did you break some wires in the process of going through the firewall?

 

Don't know for sure but I would start checking fuses

 

I really hope not. I found an interior fuse that was blown. I'm just going through them all now.

 

That sucks I would break out the voltmeter and service manual and begin tracking down wire by wire. Good luck!

 

Sorry to hear of your troubles. Which anytime camera mod were you doing?

 

I did the front and rear camera, and was hooking it up to my already installed switch pro

 

So the windows don't work. The AC doesn't work. The rear electric window doesn't work. The interior lights work including those that light up the AC buttons. The wireless charging pad light will go on when I push the button. Radio works. And then the lane departure and pre-collision are showing malfunction in the center guage cluster.

 

Part out

 

Obviously.

Also the power mirrors work and door locks work. Sun roof does not. It seems like it would be a fuse but I can't find it so far.

 

Look in the fuse box under the hood for a 30 Amp fuse labeled Power.

 

I hate anything electrical.

 

Next time let a professional do the install.

 

Yep, probably a broken/loose wire or blown fuse that will just be a good learning experience tomorrow, but better to pay thousands over your life to have "professionals" do it. Actually if you've ever been in an accident better hire a driver too.

 

This isn't my first time around wiring. Since it's not looking like a fuse, yes it's probably wire(s), but I was hoping someone may have some specific ones to look at and do tests on. I'm breaking out the multimeter. Just looking for anyone that might have some ideas besides "hur dur let a professional do it".

Thank you to the people actually trying to help.

 

Finally, someone who thinks they know everything.

 

Why do you feel I was kicking anyone? Also, if you'll notice, I wasn't responding to the OP.

 

Some one say part out? Good luck OP bumped to the top so someone can help out.