Tacos in St. Louis area

Odds are, I will be in Indiana that weekend...unless I happen to get an Indiana turkey before then. Have to be in Indy for work that week (W/O 6th) and I'll probably end up at the parents the weekend on both ends of the week. All good though. Gives me a little more time to collect hardware and some nerves before that attempt happens again! But, if the Indiana turkey hunting is over before then, I'll try and swing by on my way back home.

And thinking about it now, that means a pretty travel heavy next few weeks for me. On a completely unrelated note, if anyone wants to see any cool pics from the NRA show, let me know and I'll post some up. It's the weekend after Easter, so I'll be at the home stomping grounds those two weekends too.

But, as long as nothing comes up between now and then, @VangaSTL, pretty sure I'd be able to make it down for a cookout/hangout the 19th.

 

If you followed me into Rentchler Station today and turned right onto Rentchler when I turned left...

Nice Tacoma, though about pulling over to say hello and introduce myself but I had to get the boy home so he could change for bjj and turn right around and head back into town.

 

The cap rack that I posted for @ChandlerDOOM 200 years ago is spoken for.

 

Niice

 

Anyone put in a front locker or a front LSD? Was just curious

 

I wont be able to make it that weekend because of my sister's graduation as well, might be able to make the BBQ though

 

3rd Gen Sport Guys with a MT, or 3rd Gen SR 4 bangers with a MT.

ARB Rear $700 shipped

https://www.tacomaworld.com/threads...locker-8-75-rear-tacoma.591816/#post-20327496

 

He’ll ship it for $600 in s week or so.

 

Sounds like a sick deal.

 

I should be able to be there hopefully along with 5100s 883s and an AAL if that is alright...

 

Start PB blasting all the bolts and nuts now, and repeat every weekend.

 

I can do that. Hopefully none will be too bad. I only had 1 on both the bumper and skid that gave me trouble.

 

Looks like I need to hit these 5 bolts up front and the back I'm thinking will be easier to figure out, I assume the bolts on the brackets to remove leafs, the spring pack bolt in the center and the bolts on top and bottom of the shock. Can anyone confirm?
Edit: u bolts as well
And probably a stupid questions but I'd be dumber not to ask... Some pb blaster won't make the bolts want to let go too easy over the next few weeks will it? I have a 7 hour trip to move back from college coming up, might have the boat ~2500lbs in tow as well.

 

Better to ask and think you sound dumb than to not ask and show up with the wrong parts and broken equipment.

 

Just make sure you have physically looked over every part when it comes in to make sure you aren't missing anything. Right @Thtguyrandy? rofl

 

Yessir!

 

FYI RCI Spring Group buy is taking names for anyone wanting skids or sliders

 

Put me down for a IOU? Are those acceptable lol?

 

You’ll be fine, it acts as a penetrating oil to help break up rust. Torqued hardware won’t move until we actually put tools on it.

Are you planning on swapping in new upper control arms as well? If so I also suggest picking up a new set of upper control arm bolts from your local Toyota store. It sucks to find out that you need them when you don’t have them and you can always return them later if found to be unnecessary. Grab a pair of the lower shock bolts that pin the bottom eye to the lower control arm for the same reason.

Check your front brake lines and investigate to see if your generation of Tacoma will require extended length replacement lines in the front. I mention this as brake lines should not be your limit straps.

 

What's the discount on their group buy rates? They just did a 15% Tax sale, for reference/comparison.