1st Gen Lunchtable Thread - General Discussion

I replaced them but idk how much difference it made.

 

Buy some dynamat while you are at it

 

So if I got this kit, https://www.crutchfield.com/p_575R152S/Rockford-Fosgate-R152-S.html?tp=106&l=Q those tweeters should fit where the stock ones go? I cant seem to find a definite answer on what size our stock speakers are either.

 

Go to cruchfield.com and life will be easy.

 

I am using their site, but they still list like 5 different speaker sizes I could go with. How do I know what actually fits without the need for a Sawzall?

 

I run stock tweets and stock subs in door and Rockford in the rear, sounds clean with decent bass.

 

Look at the fit section. Also it will include any adaptors needed to fit speakers. I went with stock size and had no issues. Still might do a powered sub at some point. But I'm happy with it.

 

I think oem is 1” tweeters.

This is whats in my truck

 

I would get one with separate tweeters and just remove the stock ones. If not get coaxials and just leave the stock tweeters unplugged. If you have coaxials and the stock tweeters you’ll have an really messed up soundstage

 

I'm using the stock tweets with stock door speakers and aftermarket rears, it sounds good. But I upgrade the headunit.

 

I believe 6x8 is whats stock in your years doors and rear

 

That shouldn’t sound too bad. I was more so saying using coaxials in the front with the front tweeters still hooked up would screw with sound

 

Too much highs that way..

 

I wanna replace everything. Tweets, door and back seat speakers. That kit above has 1" tweets with 5.25" woofers w/ adapter brackets, and Ill get 2 more of the same woofers w/brackets for the rear, that sound like it should fit? Think I could use my stock speaker wires?

 

https://www.instagram.com/p/BwPpivUhYGA/?utm_source=ig_share_sheet&igshid=16oklcwuvzwts

 

Probably will sound good. I have 1” tweeters with 6x8” all around on stock wires and a upgrade deck and it sounds clear(after i had to dynamat around the doors

 

I have a smittybuilt rtt sitting in my 4wp cart. 657.49 total out the door. It would look real good on the sequoia..

 

Do your new tweets fit behind the factory covers?

 

Do it, im thinking of getting a super winch for my tacoma lol

 

Yes. Look at above post