1st Gen Lunchtable Thread - General Discussion

If your not running an separate amp the factory wires are fine. I don’t know how the tweeters will fit but I would recommend some coaxials for the rear since there’s no good spot to mount the tweeters

 

My tweeters fit up front no issue

 

All Im seeing is this https://www.crutchfield.com/S-ZeHqF...nwood kfc st01&awmt=b&awnw=o&awat=&awug=83822, can you take the covers off or something?

 

Yeah they just pop off

 

Wait you mean cover on speaker, uh idk, i guess. I just bought everything and had a shop do it when i went to Mexico. So they popped the covers off them

 

https://youtu.be/Jnb6uYAzuno

 

I'm leaning towards using the stock tweets up front to avoid the hassle of finding something that fits with the stock covers.

 

No I decided against it, I can powdercoat the intake plenum and the manifold/body but I can’t do the rotor case without pressing the bearings out. So paint will have to do.

 

She's Mongolian not japanese

 

Older tacos didn’t have tweeters at all lol. Or just leave unplugged and get coaxial like @Empty_Lord been saying

 

Nothing fits the stock covers. I looked. And crutchfield said doesn't exist.

 

That's what Im seeing too. Ill prolly just reuse them, replace the front woofers, and go with coax in the rear.

 

So just bbq meats with a side up rape and pillaging

 

I guess the shop modified my tweeters then

 

Pretty much she feeds me rapes me then takes my wallet lol

 

Yup.

 

Is her name genghis khan

 

Alpine never made a Gen 2 supercharger, it was always the same design. Magnuson had two generations of supercharger thus the gray and black differences.

 

Can she ride a horse and fire off 3 arrows in less then 5 seconds while doing it?

 

Liar