Wyoming B.S. Thread

This is what all 4 of mine look like. 2:30 ish I guess

 

Aren't you still running OEM LCA bushings?

 

I was about to say "so what? Mine still hit before my new lcas."

Then I remembered I basically had no lca bushings..

 

My LCAs droop a lot further with the Whitelines compared to stock. I don't hit the coils with my Kings, but I think my Kings are the limiting factor now.

The stock bushings definitely limit down travel.

 

Not if you don't have any bushings

Can't limit you if they don't exist..


I certainly am getting all the down travel possible now. Ucas will only give more up and down. Be nice to measure it. Wish it was easier to do so

 

What about the back cams? That's only half the story. And being they're pointed the same direction really means they're opposite one another. Something's bent or shitty alignment.

 

Guessing Dan's at full droop on the coilovers there judging by the angles. It would be really easy to tell by pulling the lower shock bolt and seeing if they extend any further.

 

something is bent then.

The rears are the same direction turned to the driver side.

How does that make them opposite?

 

And camber is the same? Your shit is bent dude.

The cams are to the inside of the centerline on the driver side, and outside on the passenger. That should result in quite a bit different camber numbers side to side.

 

Oh sorry you're talking left and right. I thought you were referring to front and back ha

Yeah something is tweaked for sure. Can't say Im surprised.

 

cool thanks! Curious about the rears too to see if yours are crossed up(opposite of each other front to back). Most curious of that to see if your bushings are more strained or not vs my overly priced lcas.

 

I would think a spindle unless solo has the least accurate set of jigs ever made.

 

nah, just curious how it compares since the LCAs add castor themselves. If something is tweaked its likely a coil bucket or spindle.

 

@Blackdawg

I know you did not ask for one of mine, but here it is anyways.

 

Rear passenger



Driver rear

 

I feel like I missed the post that read "feeling cute, might post a pic of my cams later. Idk" lol

 

It was implied I suppose thanks!

Interesting. Doesn't look like you cam are crossed up but point in the same general direction.

Yours however are opposite directions. Interesting.

 

Well..are you feeling cute and gonna post a photo or what? Haha

 

If you're good you can get front and back cams in one shot. Mine are almost identical side to side.



And how my bushings look in the mounts.