installing spindles

hey guys i have my spindles in my garage waiting to be installed. Do I need any special tools to get this done? and can someone please explain to me how to bleed the brakes?

 

guess not

 

No you don't need at special tool

Bleeding with VSC
Without VSC

 

this might be a stupid question but I just got my stock spindle off and I dont see any bolts, what do I need to do next?

 

anybody? im stuck

 

hmm. Did your spindles come with the bearings already pressed in?

 

Here's a good write up. No pics though.

http://www.tacomaworld.com/forum/suspension/86181-official-spindle-install-instructions-no-pics.html

 

no there the camburg spindles. I need to remove all of that from the stock one, I just dont know where to start.

 

Good luck man. Way to complicated for me.

The write up looks pretty good and very precise though.

 

Thanks, I still cant find the 4 10mm bolts anywhere

 

oh gotcha how do I get the shield off?

 

actually first off how do i get the rotors off?

 

haha i was hoping you wouldnt say that they are not budging at all, is there a tool that will get them off?

 

not trying to be a dick but u might be over your head, saying that to get the caliper off... there should be 2 bolts that face towards the truck that you will loosen and pull out and that will allow the caliper to slide off

Good Luck

 

A heavy rubber mallet. Not sure if Toyota uses them, but some have a flat head screw that needs to be removed first.

 

never asked how to get the caliper off but thanks