The Lair

Just took 2 wheel barrow worth of dirt behind the frond inner fenders.

 

Aww isnt that cute, you have the little front fender defector useless things still installed........

 

Most of the SE parks like this allow 24/7 wheeling The Flats we are going this weekend we'll be wheeling at night.

Yes unless you get the annual pass.

 

I am going to arrive that thurs and stay through till mon. I believe check in starts thurs afternoon. Thinking about picking up the patches too you know for those EAF points.

 

Naahh thats the mudflap holding by only one screw i didn't had those useless thingy lol

 

@EatSleepTacos

Truck related question....

I had my sliders powder coated. But they must not have gotten enough powder up around the "BAMF" emblem and it is starting to rust badly. How do you recommend I go about fixing it?

I was thinking of just cleaning it off best I could and hitting the area with a little rustoleum...

Adequate?

 

Rust inhibitor as best as you can to stop any rust

 

Then just black rattle can over the top?

 

yes! The inhibitor give you a paintable surface. Just rattle can the best you can.

 

On Saturday night?

 

I’ve seen that happen on other BAMF sets. It’s the raised lettering, right? If it were me, I would cut the lettering off and paint the area. Reason being it’s pretty much impossible to get in all the nooks and crannies of the letters to get a good deal to prevent rust.

 

#FullSendRandall

 

“In the way? Fucking cut it off.”

 

Yeah, it is the raised lettering. I will snap a pic here in a few when I get back to my truck.

 

From my understanding yes they allow it here. BK did MM didn't URE does Gulches doesn't because of the neighbors. Most do because they are out in the sticks Will confirm fri. when we get there. MM we thought we could but there were in a somewhat residential area and no wheeling after 10 is what we were told when we got there.

 

I vote this! I never really liked how they branded their stuff as big as they could like that without the option to not have it. Plus like you said it's hard to get everything good enough with paint unless you go uber thick and dip it in something like POR15.

 

Anyone seen these before? http://www.trailworthyfab.com/17-Double-D-s.html

 

JESUS THOSE ARE HEAVY.

 

......and expensive 500 a wheel?/ fuck