Colorado Trading Post

I'm interested in some bed bars...

 

Second dibs. Can go up to Boulder at your convenience if Red Baron doesn't work out.

 

I will have two front seats available after I buy my new to me ones in middle of May great shape never smoked in.
I also used newspapers in a previous taco I had that had been smoked in.. google it, strange but it helped absorb the smoke smell.

 

Chlorine bomb

 

Last shot at moving these, then they get packed up for the move. $200. Aluminimum, full skids. Identified one problem. **sold**


Bent loop, front plate, passenger side. Imagine a spacer, bending it back, welding a fresh loop are best options. If I were keeping them, I would remove the loops,drill the plate, and machine a 2-inch block with longer bolts to insure it doesn't happen again. Much like the stock TRD plate.

photo courtesy of dgilbert2006

As mentioned in previous post, these were a test run by CBI and required some machining to clear the frame and tow hook. I realize that is a few caveats.

 

Try leaving a bowl of white vinegar in the truck for a few days. Change out the vinegar daily.

 

Sounds good i will let you know

 

Any detail shop should have an ozone machine and/or some machine rental places will carry one. That’s going to be the most effective way to do it.

 

Interested in these I’m assuming that they require an exhaust re route?

 

I have 5 matching stock TRD Offroad wheels from a 2006, and 1 black steelie that need to go. I took them off back in 2012 and they have been sitting in my garage since.

Let me know if you are interested, I'm up in Boulder County.

 

Shampoo and Ozone

 

Replaced my 2014 OEM radiator with a CSF. 46K miles, no damage other than a few bent fins from bugs. Everything carefully removed and all lines capped/plugged for cleanliness. Comes with shroud, cap, coolant overflow bottle and some new mounts should you want em. Asking $120. Located in Durango.

 

Yup, cleaning real well then leaving an ozone generator in it with the fan on recirculation can go a long ways

 

These are 3rd gen correct? where are you located?

 

What size are they? Have a photo? If they are 17's I'm likely very interested.

 

RCI front bumper for 3rd gen Tacoma. One of a few made last spring, roughly 1 year old. Selling to buy a tube bumper.

Lights are: 2x caliraisedLED pods, and a 25” extreme led amber/white combo bar.

Asking $1200 OBO with the lights, or $1000 without them. Winch is not included. There are some scratches on it where I’ve scraped rocks that you can see in the pictures. Also an outline of where I welded a plate in the 3”x30” hole to mount a 1.5”x25”. Driver side tube rubs the stock bumper slightly, would recommend putting a piece of adhesive rubber there to prevent scratching body paint. This bumper has performed great, just having a different style bumper built.

 

Free to good home. Tacoma hitch from a 3rd gen. Not sure it if it will fit on a second gen or not. Feel free to melt it and make a sword to help fight that army of the dead.

 

I’ll take it, I’m up in Fort Collins

 

FREE FREE FREE FREE FREE

must pick up SE Aurora Smoky Hill and Tower Rd

• Onkyo subwoofer
• Blackbox dash cam - pending
• Felpro exhaust gasket for 95-99 3.4l between cat and downpipe
• Coiled roofing nails
• universal exhaust hanger - pending
• 18' CB coax - pending
• 315/70R17 BFG AT for spare

No so free Knick knacks

FUCK IT -- ITS ALL FREE

• 1999-2004 F250 F350 bug visor $15
• Metal tool box $10

 

Super interested in this. It’s steel right? How much does it weigh?