What Have You Done To Your 3rd Gen Today?

If you guys love Toyota’s, Check out 205Yotas on Instagram!!

 

Lane Limited 1-Q.....righhhhhhht. You were two days early when you posted this.....

 

Lol scouts honor promise

 

X5

I already had the TRD cai but added the TRD oil cap and radiator cap from the 40% sale. I never thought I would get those 2 things but I guess I am a sucker for a great sale and they do look pretty. It was nice that TRD did not permanently seal the badge on the cap since it would have been upside down. They gave me the chance to apply it right side up.

My other mod was the Osram Night Breaker 150 which is supposed to produce 150% of the light of a standard halogen. The pictures show that it does not quite get there. All of my interior and exterior lights are LED but @crashnburn80 convinced me in his sticky thread that it is not a good idea to use them in our headlights. On my pictures the driver side light has been updated while the passenger side is still OEM. The pictures were taken from 75 feet away and while it is hard to see the Osram is more focused and does have a longer throw.

 

Updated my truck

285/70/17 Nitto Ridge Grapplers, 2" lift at the front and 1.5 at the back.

 

you need a stronger leaf pack in the rear.

 

Thats a Rad pic

 

Also interested. I thought about buying some extra bed rails and attaching them below somehow so you had the full rail functionality.

 

I would guess yeah. I had my order in with Wheeler's for maybe a couple weeks? They shipped with everything but the drivers side 5160 which I had to pick up on ebaby,.

 

Is your username a Dune reference?

Guess the QS truck makes sense then.

 

Yes and Yes

 

Thanks for choosing us!

 

Finally got around to putting my pro skid plate on, along with an oil change, fumoto drain valve, swapped to an aluminum filter housing, and swapped all the interior handles for black ones off of a hilux.

 

Bought the v rings on Amazon

 

$27 DC Cargo V-Ring Tie-Down Anchors |10 Pack | 2" Diameter Steel Bolt-on D-Rings for Cargo on Trucks, Pickups, Trailers |Flush Mount Tie-Down Anchor, Replacement for D-Ring Tie-Down w/Plastic Pan Fitting

https://www.amazon.com/Diameter-Car...+tacoma+accessories+rings,aps,248&sr=8-6&th=1

 

Looks great! What kind of lift? Any rubbing with those tires?

 

Woohoo! 3rd gen 6112’s showed up today from @HeadStrong Off-Road. Waiting for the 5160’s to get back in stock and I can finally lift.

 

Thanks
No rubbing at all, I went with a 2" lift at the front from Dynofit
and 1.5 at the back from WULF

 

Where did you get your whole set up from? And around how much total ? Looking into this exact set up.

 

OME Dakar Heavy's from wundercarparts on ebay for $480 w/ shipping
Bilstein 6112's and Right rear 5160 with several bushings for the Dakars, CB drop, new Ubolts from Wheelers offroad for $926 w/ shipping
Bilstein 5160 Left rear from partscontainer on ebay for $190 w/ shipping
**EDIT: Forgot to add the SPC LR UCA's. Bought them from someone local in Spokane I think it was $220 for both. Just had to drill out a snapped screw in the ABS wire-holder part on one of them.
I'm installing myself.
Total: $1590 **$1810