What Have You Done To Your 3rd Gen Today?

Just bought it at ebay & shipped from Toyota Japan,it took me 1 hr. to install coz I have to remove some plastic panels under the steering wheel,I took my time coz I dnt wanna break any of the plastic clips,Once u remove that u can just pull out the old push to start button & unplug it.

 

Thanks

 

does it light up?

 

I know, if you’ve seen it 1000 times then you’ve seen it on TW....you know what I’m saying. But here’s mine anyway. OEM 4Runner turd pro wheels and bfg K02s at 265/70r17:

 

Yes it does .it works like the one i removed except the lights is green not bluish

 

Well I mean theoretically that’s why we are all here, to help each other and get help from others. Or maybe I’m the odd man out and I’m actually supposed to bust chops more often

Glad I could help though! Both of the mods are super easy, let me know if you need help when you get to them!

 

Does anyone know if a Honda 450R quad will fit in the back of a SB with the tailgate down? This might be what I do with my Tacoma today.

 

I ordered a 2019 White TRD-Offroad DCSB 2 weeks ago and am still waiting on it to be shipped from San Antonio. The dealers delivery date just keeps getting pushed back and its getting quite frustrating to us. In the mean time I have ordered an array of goodies to go in/on it once it finally arrives.

1st addition:

 

These were waiting for me when I got home.....Maxsa Escaper Buddy. Only $150; we’ll see how they hold up!

 

Does any one know how to tell if your Tacoma was made in San Antonio or Baja? Got to be with the VIN?

 

Mine states where it was made on the door jam sticker right below the bar code.

 

Thanks man.

265/75R16
Second gen 5100s. Check ring at 1.75 in the front. Toytec AAL in the rear.
Unsure of offset they’re just the stock wheels (new wheels not in the funds at the moment lol)
No rub!

 

It is the horn. Baja built sounds like this
https://www.youtube.com/watch?v=bnEwUwjfV-4

 

Should be on the Monroney sticker if you still have it. It’s the big sticker they put on the window at the dealership. Hope this helps!

 

these guys will give you the right info
https://www.headstrongoffroad.com/

 

Did some stuff to the back half.


Installed Total Chaos stiffeners and tossed in a bed mat:



Added some TPO BumperShellz


And gussied up my tramp stamp.

 

How thick are these? do you have a side picture with them stacked together?

 

I really like the factory TRD OR wheels so I am sticking with those, but I am almost certain I am going with 265/75/r16 for my next tire size (same overall size as your 265/70/r17). Gives you exactly 1 inch bigger overall for a slight lift and a bit more aggressive look, and from what I've read you don't need to worry about rubbing. Probably will go with the BFG K02s as well. My uncle has had those on his Jeep for awhile and they look really nice.

I reallllly want to slap a set on now, but my Tacoma has less than 5,000 miles currently so I want to at least wear out the factory tires first. I do plan on going to Moab in the fall though to possibly check out some of the easy trails, so maybe the sandpaper will wear out my factory tires a bit faster haha.

 

MAXSA 20333 Escaper Buddy...

$99 Maxsa 20333-CB Heavy-Duty Escaper Buddy Traction Mats for Off-Road Mud, Sand, & Snow Vehicle Extraction, Bendable, Unbreakable, Coyote Brown, 2 Pack

https://www.amazon.com/dp/B07LB7ZXPV?ref=ppx_pop_mob_ap_share
They’re about 5” stacked. Just measured and got about 4 3/4”.

 

It’s a great CCW. I go back and forth between that, the G26 and 27.