What Have You Done To Your 3rd Gen Today?

I like that a lot

 

Enjoying the e-brake. Right where god intended it to be.

 

Awesome thanks. I have been looking into getting a set but can’t make up my mind what ones I want

 

Ebay and shipped from Toyota Japan

 

From what I'm seeing online, the 450R is 6 feet long. (You might want to do your own research since you did not list the model year)
I measured my tailgate and it is 1 foot 8 inches. With your five foot bed length and the additional 1" 8" it should fit.
I have seen people transporting ATV's in basically a vertical position. Back wheels in the bed, and the front wheels in the air. Just tie it down good.

 

What am I missing here?

 

Here's the best price available for the TRD push button start (RED) Not sure if it fits Tacos, still checking. Price: $152.50 & FREE Shipping

$122 TRD (MS422-00003) Push Start Switch For 86 (ZN6)

https://www.amazon.com/gp/product/B00DSLSFQO/ref=ox_sc_act_title_1?smid=A1I7WNC83JPNJG&psc=1

 

Problem is width

 

You got it! These had the best reviews in all of the equipment I researched; hopefully my research payed off!

 

I dnt know if i got lucky or what but when i bought my 19 Tacoma OR ,last month the seats looks like this already front & backseats

 

Mine is on the way.

 

So is mine.

 

Yeah, I would have liked to stay with 16s but I’ve wanted another set of these wheels since I had a my t4r trd pro with them. I don’t really know how to check clearance but I did some full lock turns in forward and reverse and didn’t feel or hear any rubs on a flat surface anyway. I don’t have any mud flaps so I’m hoping they won’t rub. I’ve only had 30 minutes or so of wheel time with the K02s so far but I love them already. The offset on these wheels seems to have widened the stance a bit as well. I wasn’t sure if I’d like that but it looks pretty good.

75s should be really nice on the stockers. Good luck wearing em out in MOAB! I had 35k miles on mine btw. It was time to spend some money I guess.

 

Amazon: https://smile.amazon.com/gp/product/B07H2W22RT/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

 

Got fitted up for some new sliders! Me and my buddy Josh at hooligan finished up the prototype sliders for 3rd gen tacos. Not pictured are the gusetts that will go in the bumpout to hold an aluminum accent piece.

 

Finally got around to doing the AC drain mod and diff breather mod. Had the parts laying around for a few months. To anyone doing these in the future, pull the front wheel to make the AC drain mod easier, and drop the spare for the dog breather mod. Both mods took about an hour, mostly just figuring out where to run the hoses.

Need to upgrade this suspension next... any suggestions out there?

 

Did you go with the

$37 Fumoto F103s LC-10 Lever Clip FS-Series Engine Oil Drain Valve, 1 Pack

Fumoto F103s?

 

I ended up going with the

$38 F103N with LC-10 lever clip FN-Series Engine Oil Drain Valve, 1 Pack

F103N, I wanted the longer nipple to throw I piece of hose on for draining directly into an old oil bottle

 

I sincerely hope you had a jack stand under that front end- don't be dumb or lazy. Don't trust jacks. Ever. Gravity is relentless!

 

Thanks, I'll check when I get back to mine at the airport in a week.