Looking into getting Tires and Bilsteins :)

So i was talking to mike and he said its gunna rub if i get 33's and not get a little lift. so he said just get bilsteins in the front and i will be good

any recommendations for tires? i know there's more than enough.

I wanna spend less than a grand

 

bump.

 

You will also need to do trimming and possible body mount chops to prevent rub at full suspension load.. also may need UCA's (or hub centric spacers) on stock wheels.

Myself, I'm going to get KM2's... you can get 285's for less than 1k for 4 tires... but you'd probably want the spare too.

 

If you keep you stock height go with a 265/70/17.

I will be getting Duratracs likely when it is time for me to upgrade. There were a few trucks with them at the meet. Matt and Al.

 

Wheel spacers make body mount rub worse. I have 32.78" tires (285/65/18), and I had to do A LOT of trimming with bilstein 5100's set at 2.5"

 

trimming what?

 

Getcha ready

 

cha what??

 

your fender... and like stated above your still gonna rub the body mount

 

awhhh i wanna keep my rear fenderwells i was thinking about trimming that about 3 inches.

If i got bilsteins all around? would that leave me to still having to trim.?

 

does anyone have any pictures? or a tut on this?

 

Got it.

So any recommendations for a place to go buy them? i kinda wanna get them before the races this saturday up in barstow i believe.

 

http://sandiego.craigslist.org/csd/pts/1882858200.html


found these.

 

^w/ 315's your going to rub a TON more than with 285's.. cab mount chop is a must and a pretty big amount of fender trimming, and even at that with just 2.5 in the front i don't think you'll clear them.

 

Holy Sh*t.... Okay? what do u guys recommend then? cuz i am lost in tires.

I go off-roading everyone once in a while. I am going to be going to the desert alot this season. but i am mainly a on the road driver.

 

The Stock TRD Sport ones