TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Yes! I feel like we’re gonna make the Tacoma great again.

 

I have one of these guys with the diffuser option and it's pretty nicely made. Have to figure out your own mounting as seems to be the case for most catch cans.

http://m.uprproducts.com/toyota-billet-oil-catch-can-separator-tundra-07-satin.html

 

Let's do it soon I'm leaving this Saturday to Arizona will be there until the remainder of the year

 

It’s not compact but I have the large mishimoto can that I can sell. Brand new. Black/black. Has a few scratches from trying to figure out where to mount it but the can is too large for my car.

I ended up switching to their carbon can.

 

For those that get one please get a 3/8 hose. I f×"%led up and got 5/16" when I changed mine. What a bitch!

 

The WIX oil filter has a release date of May 1st on Amazon for $10.60 a pop.

 

Pass. I get my filters for sub $5 at the dealership, with the drain plug gasket.

 

is it going to be one of those extra capacity filters? I've been running whatever bosch or KN is on special but I'd give the wix a go. there is a good thread on here somewhere that cuts open most brands to compare the guts.

 

It is an extra capacity filter. Lets you run an extra .5qt

 

Be sure to credit @Roostfactor and @JustDSM for the Tundra MAF/tube developments.

 

Check with @roosfactor I think he found the vendor or manufacturer that makes it.

There are instructions on how to wire up external inputs to the pro link on HPT website.

https://www.hptuners.com/pub/Pro_Link_v1.pdf

I always hated the VQ series dipsticks!

Yes, and add it to your sig as well, so people know who they’re dealing with!

This^^

I had a hardbody in 88. 30 years later it’s now been converted to a dad-bod.

 

I wired mine up this past weekend to the hp tuner. I'll try to snap a photo of the wiring.. I hooked the aem white wire the the hp tuner pro link blue wire and the pro link black wire to a ground.

 

I might add, for you boosted folks (wait.. I’m probably the only N/A guy here..) it sure makes it a lot easier to tune with the wideband data streaming. It also will allow your MAFs to be calibrated to your aftermarket intakes. They really do alter MAF readings at higher airflow rates.

It’s expensive to add the pro feature set, no doubt. So if you’re a “DIY” guy and have stuff deleted for off-road use, you can hijack one of those 5v reference inputs to log your wideband without the pro features.

The moral of the story is, wideband data is crucial to getting things dead nuts.

 

I’ll have to find those wires. They’re tied up under the dash.

 

Wix makes the Napa Gold filters as well. I know I can grab a Napa Gold 1516 locally for $4 CAD when I buy my oil at that location. If you have any sort of decent relationship with your local Napa often you can get the filters for a price that makes it worth while over dealing with the internet.

 

Alright guys. I have my 2.8 pulley and URD Fuel Pump (went with DW) on order. Just need to get the tuning ordered and I should be set. Who wants to take my money? LOL!

 

Oil Catch can with a disposable fuel filter. The OCC has a drain petcock and the filter is replaced every oil change.

 

Have you run into problems with your fuse block where it is? That’s where I’m thinking of placing mine but wasn’t sure if I should get waterproof box.

 

No problems, though I wouldn't buy that one again since it doesn't seal.