AZ Classifieds

Harambe4President · Apr 26, 2019

If anyone is selling a short bed camper shell, let me know. Starting the search for one.

NitroCircus177 · Apr 26, 2019

freddy2923 said: ↑

Who was selling steps for a 3rd gen on here? Mother in law might be interested
Click to expand...

Wasn't me, but I might willing to get rid of my predator steps

65skyturbo · Apr 27, 2019

Weekend bump. Somebody needs a new set of 17x9" Stealth Custom Series Ray 10 wheels. Comes with black ET lugs. Never mounted. Save approximately $180.00 versus buying them from SCS assuming that they even have them in stock. They are currently sold out of all Ray 10 17" wheels. Matte gunmetal finish. Located in Mesa. $1000 firm.

motorsport36 · Apr 27, 2019

Atl-atl said: ↑

Sweet, Ill take them whenever you're available.
Click to expand...

Be home today at 6pm and tmrw after 2 pm.

Michaelm466 · Apr 27, 2019

Harambe4President said: ↑

If anyone is selling a short bed camper shell, let me know. Starting the search for one.
Click to expand...

Check offerup- found a couple in good shape for decent prices around phoenix/mesa

Ace115 · Apr 27, 2019

Anyone here have a set of 1st Gen spindles they wanna get rid of?

Coot83 · Apr 28, 2019

DevilDocAZ said: ↑

Anyone need a Toolbox? Came off the 2000 Tacoma. I don't have the key but you can order a replacement for $10 from Husky or just replace it w a new lock for $5.99 from Home Depot.

Asking $120

It's full of some sweet ass stickers, when you pop the toolbox open younwill have some serious street cred.

Click to expand...

I get the vibe you are a fellow OG biker.

Coot83 · Apr 28, 2019

DevilDocAZ said: ↑

Hahahah. My very first "good" bike was an Elf. It was cool stuff back then. I've ridden one recently and it was still cool.
Click to expand...

I got to admit that escapes me...at first glance I thought you were gonna reference Ellsworth.

Rhino8541 · Apr 28, 2019

I have a 7.62 ammo can for sale for anyone interested.
https://www.tacomaworld.com/threads/fs-7-62-ammo-can.606951/

tslick · Apr 28, 2019

First gen takeoffs in Yuma, Az.

1. OEM rear bumper. Small ding right corner. $50.00
2. Tow hitch heavy duty receiver type. $50.00
3. Torque lift frame mount camper tie downs. Great for 4 wheel camper. $200.00
4. OEM skid plates. Not dented. $70.00
If interested PM me. Pick up in Yuma.

Thank you

Padilla141 · Apr 28, 2019

DillonBarron said: ↑

We’re you still interested? The original guy hasn’t responded in a few days but I’ll give him until tomorrow. If he doesn’t reply, would you be interested in swapping this weekend?
Click to expand...

Thanks for the exhaust Dillon, sounds amazing. Also thanks for the makers mark.

Captain Magma · May 2, 2019

Captain Magma said: ↑

Got some stuff collecting dust now, located in Tucson.

1st gen DCSB tan Softopper. Had installed for 2 years between Tucson and San Diego. Topper is still in great shape over all. Comes with a never used cover to protect when it’s folded down.

Front and rear window have some miles on them, front is still pretty clear, rear probably should be replaced. Both can be had from Softopper for like $50-75 last I checked. Very easy swap, just unzip/snap and pop in the new one. I just kept it rolled up full time.

All the buckles are in great shape, except one is cracked, it still clips if you give it a gentle hand.

Has very light staining from driving around at work. It has come out with some 303 cleaner in the past, but I gave up cleaning it every time, since it happens pretty frequently (I work at a mine). You really have to be up close to even see it, even the photos don’t pick it up that well.

Overall been very pleased with it since I purchased it, but finally found the shell I wanted so it’s time to let it go. Looking to get $450 and willing to meet/ TW express to Phoenix.

(THIS ITEM WILL REQUIRE SOME FABRICATION TO MOUNT/USE)
Up next is a custom 1st gen Demello dual swing out. I bought this used from a member on here last year. He pulled it off a truck that was totaled and never pulled the mounting brackets off the old truck before it was crushed. So if you aren’t afraid of a little fabrication this will be a cheap way to a dual swing out. It also is not a traditional locking method, just a spring loaded bar that runs through both swing arms.

The swing outs were added after-the-fact by the previous owner. I honestly couldn’t really tell you much more about it since the previous owner didn’t really know much aside from the swingouts. Since this bumper was not initially designed with swing arms in mind, the spindles block the tailgate from opening fully. Again, if you’re not afraid of a little fabrication this shouldn’t be too tough to relocate them.

Looking to get what I paid, asking $600 OBO, will meet or deliver in PHX/Tucson. Can provide more pics if needed
Click to expand...

Bump, still some interest in the bumper, but nothing concrete. Feel free to make an offer on either.

Atl-atl · Apr 29, 2019

Anybody want a CBI Offroad 2nd Gen Tacoma drivers side fender antenna/flag/ditch light mount? I had the runaround with Puretacoma for weeks about getting the wrong thing multiple times and gave up on them. Forgot I even had this thing. Brand new never installed hadware and stickers included. Retails for $40. $30obo.

CJ_ · Apr 29, 2019

CJ_ said: ↑

Does anyone have a 3rd Gen OEM bed cover they’re looking to get rid of?
Click to expand...

Bump

Daria · Apr 29, 2019

Two Decked boxes, $70 for both.

swalters · Apr 30, 2019

Finally got around to making an ad for the truck. $6500 for TW

https://phoenix.craigslist.org/evl/cto/d/apache-junction-1999-toyota-tacoma-4x4/6871769671.html

GLOOMY · May 1, 2019

WTB - TRD BEADLOCKS!!! Plz let me know what you have or any other TRD wheel.

Captain Magma · May 2, 2019

Captain Magma said: ↑

Got some stuff collecting dust now, located in Tucson.

1st gen DCSB tan Softopper. Had installed for 2 years between Tucson and San Diego. Topper is still in great shape over all. Comes with a never used cover to protect when it’s folded down.

Front and rear window have some miles on them, front is still pretty clear, rear probably should be replaced. Both can be had from Softopper for like $50-75 last I checked. Very easy swap, just unzip/snap and pop in the new one. I just kept it rolled up full time.

All the buckles are in great shape, except one is cracked, it still clips if you give it a gentle hand.

Has very light staining from driving around at work. It has come out with some 303 cleaner in the past, but I gave up cleaning it every time, since it happens pretty frequently (I work at a mine). You really have to be up close to even see it, even the photos don’t pick it up that well.

Overall been very pleased with it since I purchased it, but finally found the shell I wanted so it’s time to let it go. Looking to get $450 and willing to meet/ TW express to Phoenix.

(THIS ITEM WILL REQUIRE SOME FABRICATION TO MOUNT/USE)
Up next is a custom 1st gen Demello dual swing out. I bought this used from a member on here last year. He pulled it off a truck that was totaled and never pulled the mounting brackets off the old truck before it was crushed. So if you aren’t afraid of a little fabrication this will be a cheap way to a dual swing out. It also is not a traditional locking method, just a spring loaded bar that runs through both swing arms.

The swing outs were added after-the-fact by the previous owner. I honestly couldn’t really tell you much more about it since the previous owner didn’t really know much aside from the swingouts. Since this bumper was not initially designed with swing arms in mind, the spindles block the tailgate from opening fully. Again, if you’re not afraid of a little fabrication this shouldn’t be too tough to relocate them.

Looking to get what I paid, asking $600 OBO, will meet or deliver in PHX/Tucson. Can provide more pics if needed
Click to expand...

Bump, price drop on softopper

BillDaCat8 · May 2, 2019

Captain Magma said: ↑

Got some stuff collecting dust now, located in Tucson.

1st gen DCSB tan Softopper. Had installed for 2 years between Tucson and San Diego. Topper is still in great shape over all. Comes with a never used cover to protect when it’s folded down.

Front and rear window have some miles on them, front is still pretty clear, rear probably should be replaced. Both can be had from Softopper for like $50-75 last I checked. Very easy swap, just unzip/snap and pop in the new one. I just kept it rolled up full time.

All the buckles are in great shape, except one is cracked, it still clips if you give it a gentle hand.

Has very light staining from driving around at work. It has come out with some 303 cleaner in the past, but I gave up cleaning it every time, since it happens pretty frequently (I work at a mine). You really have to be up close to even see it, even the photos don’t pick it up that well.

Overall been very pleased with it since I purchased it, but finally found the shell I wanted so it’s time to let it go. Looking to get $450 and willing to meet/ TW express to Phoenix.

Click to expand...

I've got a first gen friend that may be interested.

Got a pic of rear window unrolled?

I don't see the rails that sit on the bedsides in these pics. Got those?

Captain Magma · May 2, 2019

BillDaCat8 said: ↑

I've got a first gen friend that may be interested.

Got a pic of rear window unrolled?

I don't see the rails that sit on the bedsides in these pics. Got those?
Click to expand...

It has everything needed to mount it, I’ll snag a pic today/tomorrow of the window

Log in or Sign up

Welcome to Tacoma World!

AZ Classifieds

#39661
Harambe4President Well-Known Member

#39662
NitroCircus177 Well-Known Member

#39663
65skyturbo Well-Known Member

#39664
motorsport36 Black Lights Matter

#39665
Michaelm466 Active Member

#39666
Ace115 Well-Known Member

#39667
Coot83 DORKEL NATION

#39668
Coot83 DORKEL NATION

#39669
Rhino8541 I like ze best!

#39670
tslick Well-Known Member

#39671
Padilla141 Member

#39672
Captain Magma Well-Known Member

#39673
Atl-atl Well-Known Member

#39674
CJ_ Well-Known Member

#39675
Daria Can I pet your dog? Moderator

#39676
swalters Well-Known Member

#39677
GLOOMY Well-Known Member

#39678
Captain Magma Well-Known Member

#39679
BillDaCat8 Well-Known Member

#39680
Captain Magma Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

AZ Classifieds

#39661 Harambe4President Well-Known Member

#39662 NitroCircus177 Well-Known Member

#39663 65skyturbo Well-Known Member

#39664 motorsport36 Black Lights Matter

#39665 Michaelm466 Active Member

#39666 Ace115 Well-Known Member

#39667 Coot83 DORKEL NATION

#39668 Coot83 DORKEL NATION

#39669 Rhino8541 I like ze best!

#39670 tslick Well-Known Member

#39671 Padilla141 Member

#39672 Captain Magma Well-Known Member

#39673 Atl-atl Well-Known Member

#39674 CJ_ Well-Known Member

#39675 Daria Can I pet your dog? Moderator

#39676 swalters Well-Known Member

#39677 GLOOMY Well-Known Member

#39678 Captain Magma Well-Known Member

#39679 BillDaCat8 Well-Known Member

#39680 Captain Magma Well-Known Member

Products Discussed in Entire Site Forum: Arizona Thread: AZ Classifieds

#39661
Harambe4President Well-Known Member

#39662
NitroCircus177 Well-Known Member

#39663
65skyturbo Well-Known Member

#39664
motorsport36 Black Lights Matter

#39665
Michaelm466 Active Member

#39666
Ace115 Well-Known Member

#39667
Coot83 DORKEL NATION

#39668
Coot83 DORKEL NATION

#39669
Rhino8541 I like ze best!

#39670
tslick Well-Known Member

#39671
Padilla141 Member

#39672
Captain Magma Well-Known Member

#39673
Atl-atl Well-Known Member

#39674
CJ_ Well-Known Member

#39675
Daria Can I pet your dog? Moderator

#39676
swalters Well-Known Member

#39677
GLOOMY Well-Known Member

#39678
Captain Magma Well-Known Member

#39679
BillDaCat8 Well-Known Member

#39680
Captain Magma Well-Known Member

Products Discussed in