Ultimate LED turn signals

Just to confirm: people have had issues using these blinkers AND LED front turn bulbs?

I installed my ultimate blinkers today, super easy install and a huge upgrade from oem. I'm also going to upgrade my front blinkers to led.

 

I have the Ultimate V4’s, Total Tails’s Stage 1, and led’s in my front turns from DeAutoLED and have zero issues. If you can’t see my turn signals then you shouldn’t be driving lol.

 

Sweet, Thanks for the response.

 

No shit. I was responding to another person.

 

Hello all,

Yesterday I installed my sexy new V4s to increase my curb appeal. Install was fine and easy, tested [with the truck off] and everything was fine. Today when I turned the truck on and drove around, I noticed that my turn signals did not work at all. They would flash once and then stop. This was bilateral, as well as with the hazards. When I turned the truck off again they worked just fine [truck not running]. Any thoughts on this? It acted like hyperflash but backwards.

@mesojdm, did I mess something up or forget a step with install?

 

Remove any aftermarket resistors that may be added. Too much load will cause a single or double flash then stop.(have to turn truck off then back on to reset). On the other side, not enough resistance will cause hyperflash. Our trucks are very temperamental in wanting the "sweet spot"

 

Nothing aftermarket is installed wiring wise I believe. Maybe reverse lights? I will take a looksie around though! Thanks for the information.

 

I’ll take pics tonight but I have the same issue but it’s the passenger side that’s off. Driver side looks normal. Any others having this issue?

 

No amber DRL?

 

It’s actually all in programming so I’m sure I could set that up

 

What’s a ballpark eta for the v5s?

 

Yes pls amber everything!

 

Curious if in programming, can you set it up for white DRL and Amber running light when headlights are on?

I’ve got your limited edition but would love Amber at night with headlights on with the next set.

 

With the sequential turn signals?

 

Thanks for sharing. We hope to eliminate hot load resistors from all cars forever

 

Super easy to install, look awesome! I had the same problem as well with the peg hole not lining up properly, only on my driver side though. I took the tip of my pocket knife and just reamed it out a little bit, installed easily after that. Took me a minute to figure out WTF was the problem though when I couldn't get the mirror cover back on lol

 

YEah...Im looking forward to the V5's so I can get some cheaper v4's from those who are upgrading..

 

i bet a lot of people are having the problem but dont notice the cover sitting up slightly higher on that side

 

Yea I also found the peg hole tight but i was able to resolve that by pressing them together firmly and the peg popped through

 

@kaijac03 Taiwan sun on that door decal?!