NW WA Meet / BS Thread

thats cool. invite the Puyallup guy but not the actual local guy

 

I'm there for work. Every. Day.

 

Do you just go to the stores or actually go to PSNS?

 

My bad, I’m new here

 

I supply the bremerton store every morning, and then do a bunch of deliveries through port orchard and gig harbor on the way back. Occasional trips to bainbridge and poulsbo.

 

No that would be fermented grapes

 

I feel like you arent lol. Not sure why though I usually end up at Poulsbo Sportmens Club since I go with my dad and with his eye site and all thats good enough for him

Guess i actually never knew who you worked for lol. I know the couple Praxair drivers who come on base and thats it. Well know enough to say hi and BS with them at least

 

if you say so old man

 

Pacific Welding. We don't do a lot on base, and there's a local driver to Bremerton that does that anyway. So usually my day is supplying that store, and then a couple aluminum boat manufacturers and a bunch of dentists.

 

I kind of figured based on your comments. I never dealt with the welding gas supply side who got a lot of the 300cuft bottles. More dealt with the LN2 trucks

 

It's neat dumping that shit out on the ground.

 

Lol guess Ive used ti so much its a meh thing. Frozen a lot of crap with it.

Still best time with it had nothing to really do with the actual gas but rather the government shut down in 2013 or whatever it was

 

stick about an inch of it in a 20oz pop bottle, screw the lid on, and throw it after about 10 seconds...

 

Haha all sorts of fun stuff. We were at Point Loma in San Diego setting up and they had already delivered the tanker. We had a lot of free time waiting to set up a LN2 freeze and we playing with the tanker quite a bit. The sentries had a lot of fun too

 

I like me some fermented grapes. I'm on fermented grapes right now!

 

Well found the first loose bolt. Brand new fucking frame and the alignment tabs already bent over.

I noticed it started pulling to the right. That explains why.

 

Cam tab gussets...

 

I'm thinking just a fatty bead down the sides to stop them from folding over.

 

CV boot down!!!

Good thing my LCA skids double as grease catchers lol

 

Made my own version of the urd afr long tube header extension harness last night. I salvaged the plugs from the hacked wring harness I got with my replacement motor and also two old afr sensors.

Also, if anyone finds themselves needing, I have various other plugs on the wiring harness side for 05-11 1gr-fe. 6 injector harness plugs, 6 coil harness plugs, maf, throttle body, rear O2 sensor plugs and a few others also if someone needs a replacement. All plugs have 1-2ft of wire still attached to them.