35 inch tires with 2 inch lift?

I have a 2017 third gen on stock suspension right now. My question is do you guys think I'd be able to run 35's with out rubbing when I get bilstein 5100s 2 inch lift and a 1 inch toytec body lift?

 

Not a chance

 

Probably right. Guess I'll go 33s

 

Lifts do not prevent rubbing. Any time the tire articulated upwards into the wheel well, there needs to be room for it. The areas where rubbing occur are fairly low down, so unless you run a massive drop-bracket lift, you will not be clear of the cab mount.

Most require a CMC (cab mount chop) to run 33’s, so 35’s is a stretch.

The only exception would be a truck with huge preload spacers, that is only ever driven on perfectly level ground, and never articulates the suspension.

 

Sounds Legit

 

I was going to do a CMC anyways with 33's, but in this case what would I have to do to run 35's?

 

lots of cutting, trimming, heat-gunning, shaving, ect

 

Got it. Might just go with the 33's and avoid that mess.

 

Honestly, I think your truck will thank you in the end. 35’s are hard on things designed to run 30’s from the factory.

 

Honestly a pretty smart choice, your wallet will thank you

Post a pic when you get it all setup!

 

255 x 85 x16 or 80 x17 are 33s

On OE wheels no lift or cutting is needed.

And 35s would make you want to regear to regain driveability. Not a cheap proposition.

 

Got it! Thanks for the help/advice guys. I'll post a picture when she's all set up.

and might have to chop a bitter fender but will be easy for the most part

 

It’s possible. People have done it before.

 

But you have to want that look. Arguably a great performer, but the tall skinny doesn’t appeal to everyone.

 

Was going to go with Nitto Trail Grappler M/T LT285/70R17 121Q E (10 Ply) BW

 

I will say, my "skinnies" do not look significantly skinnier than the factory tires. I haven't done a true side-by-side on two mounted tires, but they're quite beefy compared to stock.

 

True, and it doesn't as function well in all situations.

However, many folks just know they want 33s, because internet.

 

Not to mention gearing to counter the loss of power

Edit: already been mentioned lol I can’t keep up with these new posts.

 

Fuckin make that shit happen bro

 

Why 10 ply?