Wheel spacers

has anyone used the G2 1.25” wheel spacers on a newer Tacoma? Need to do this because the tires I put on are 3” wider then factory and will rub on the upper control arm when I get an alignment.

 

I would go BORA or Spidertraxx. They're the only brands I trust the quality of the studs on. I have the 0.75" BORAs on my truck and am very impressed. Both are around $200 for 4.

 

I've had those G2's on for 3 years now, no issues at all. Definitely required for wider tires. Beware though, you are going to eliminate rubbing on the upper control arm, but create a hell of a lot of rubbing in the wheel well when turning tight and especially on trails.

 

3 inches wider?? Wow. Guessing MPG gonna take a massive hit
Edit. Unsure of g2 but bora has served me well

 

what size tires are you running? Do you have a lift or Leveling kit on yours?

 

has not yet but we will see. The SR model came with P245/75SR16 and I went to a LT285/70R17 and its close to the upper control arm

 

Gotcha. 285 s do look nice

 

That’s the before and after so you can see why I did it!

 

I've got 285-70-R17 with the stock rims and 5100's set at 2.5".

 

I found out at 4 wheel parts that the G2 spacers are made by Spidertraxx.

 

Oh ok, in that case they're probably good quality then

 

I got my BORA's from Wheeler's Off-Road. They offer forum member discounts as well.

 

Same here.