Can't get front alignment correct after installing Bilsteins

Hey everyone. I did bilstein at 2.5 inches in the front with stock sport springs, and 2016 rear springs and a spring pack and a 1 inch block. Also did a diff drop and I cant seem to get my front end alignment correct. Should I do adjustable control arms to correct this or go with a full suspension lift?

 

What are your alignment numbers. Post a pic of the print out.

 

Sorry I don't have any my front end guy is old school. I also replaced my lower control arms during this process because the cams were locked up.

 

@ 2.5", you may need aftermarket UCA's (upper control arms).

 

Will adjustable ucas fix my problem

 

I'd suggest the LR UCAs. Makes getting an alignment really easy. Your alignment tech will thank you for it.

 

I've had this tacoma 5 years and don't want to sell it however if I can't resolve this it will become a land cruiser

 

I'm darting around on the highway. And hate to throw away another 6 hundred plus if it doesn't fix my issue.

 

You could also drop it back to 1.75" (2"). That's where mine are, and I have stock UCA's.

 

Take the lift off if you dont want to spend the money to fix it and do it properly.

 

Why does everyone recommend bilstein 2.5 if this is a problem? I'm not a kid and have had several lifted toyotas. But unless ucas fix this I'm going full blown. Sons starting college was trying to be cheap

 

I'm running 265 70 17s still if that matters

 

I’m running a TRD PRO Billy setup on my 14. I tell the shops to do a 2015 PRO alignment. Seems to work.

 

Thanks rnish I will ask. No adj ucas?

 

I will try ucas if it will help. Just didn't want to waist money

 

Edits:
(My) UCA’s are stock Toyota. (My) Tires are 265/70 - 17’s with stock rims.

 

I have 2 inch OME lift and I got the SPC LR UCAs with 265 70 17 tires. The LR UCAs helped with getting the alignment to spec.

 

Yes rnish

 

So its adjustable ucas or go big? No solid awnsers.

 

Also had to do the bushing on the driver side immediately