Can't get front alignment correct after installing Bilsteins

You say that like it's s bad thing.

 

I should have known better. I saw too many threads hear should have gone full blown bds lift

 

So can anyone here tell me should I back the bilsteins down and get a real lift or put in adj ucas?

 

seems to be fairly well documented that going to the top of the bilstiens will requre UCA's to get your alignment angles back. I would say go that route or drop it down to the second from the top setting.

 

Thanks rn923

 

Any advice on adjustable ucas

 

Or brands

 

If UCA's are in your budget and you want the height then do that, if you UCA's arent in the budget then down to 2" you go

 

Ok thanks

 

SPC uppers

 

Set the 5100s to 0 and add a 2” lift coil.

 

Need more details. You’re not giving all the info. How off are we talking. Is it your toe? Camber? Caster? All of them? Was it installed professionally or by you? Before you do anything, take it to a shop that has an updated alinement system so you can get actual printouts and know your numbers

 

His guy being old school tells me he wasn’t going off of numbers at all. And if he’s eyeballing it, then that’s the whole problem right there. Get an alinement on a computerized system that will show you the alinement numbers

 

What does that even mean?

Is he using strings and voodoo?

Regardless of experiential wisdom no one can assure you of a correct solution unless the full problem is known.

So we need to see numbers like @JaCado asked for.

And that much lift using preload isn't cool anyway, regardless what the Billie fans say. Using the correct spring rate is a much better way.

 

Nope. Hubs are what are aligned. Tires and wheels dont even need to be on the vehicle.

 

Although it would be nice to have them on

 

Just like it’d be nice if my wife stopped yelling at me for buying stuff for the truck

 

I hear duck tape can solve that

 

She’d rat me out in a second! Oh hey Jay! How ya been? You seen the crap the douchbags in the RCI groupbuy were tryna pull!

 

Nah, I missed it. What went down??