RRW Bolt-On Rock Sliders | 2016 - 2019 Toyota Tacoma (DCSB & DCLB) | Promo Code: SlidersRH

Not bad, I would give it an 8 of 10 quality. Install including drilling the extra bolts was about 3 hours. Definitely can be done by one person alone. (Good luck drilling into the frame..). I'm definitely covering those plastic caps with a thick layer of line-x in the near future. For the price back in Nov 2018, you can't beat it. These are pretty good looking sliders. If anyone have any questions feel free to send me a DM or write me here @Setogu

 

Hello Guys,

Dropped off 10 sets at powder coating on Monday. Should be getting them back at the end of the week and will ship out the next batch!

 

I actually packed that order! Glad it made it safely.


Thanks for the post!

 

Nice! By the way what kinda of pipe, Whats the dimensions on the pipe I.d /O.d Kinda planning ahead here

 

Are you referring to the main tube?

 

Yep where u have the end caps inserted

 

The problem with plastic end caps is that their is a good possibility that the capped ends will be the first thing to hit a rock, a welded end cap will protect the end of the tube from from being pinched in, a plastic cap will not. If the goal is to make a quality product I’d recommend factoring an extra 15 minutes to add end caps. I’d also recommend doing that last as it will seal the tubes which makes it possible to build up pressure in the sliders and cause your welds to blow out during the welding process.

 

Just got a Shipment notification order #R2069

 

Got my shipping notice today. Order #2004

 

Sliders arrived today. Packaging was alright, but one end was popped through and the plastic end cap was a little buggered up, but not anything to be too concerned about. Hardware in the other intact box was scattered about, will leave to take inventory to see if everything is there. Didn't have much time to look at them, but first impressions are that the powdercoat was very nice, however some of the welds leave a little bit to be desired. While I don't think weld strength is in question, aesthetically some aren't the greatest. Overall, I am pleased with then, especially at the price point I got them at.

 

Shipment confirmed!
R#2241

 

Just looking to see this one through... glad you guys are finally starting to get your sliders.

Order #1844 - Oct 24, #2 on list - @Taco_Outcast (Received Apr 26)
Order #1853 - Oct XX, #4 on list - @dunkshaw (Received Mar 19)
Order #1855 - Oct 28, #6 on list - @JonesMGMOR (Received Apr 30)
Order #1884 - Nov 07, #8 on list - @Setogu (Received Apr 24)
Order #1916 - Nov 10, #10 on list - @JEM1BLK2019 (Received Apr 11)
Order #XXXX - XXX XX, #13 on list - @187dust
Order #1993 - Nov 21, #17 on list - @Hans7 (Received May 4)
Order #2004 - Nov 22, #20 on list - @vegangunguy(Shipping)
Order #2046 - Nov 24, no email received @illogical (Cancelled)
Order #2069 - Nov 28, no email received @Vq-1 (Shipping)
Order #2084 - Dec 03, #31 on list - @CSlatts99 (Cancelled)
Order #2139 - Jan 03, #34 on list - @calenatar (Cancelled)
Order #2190 - Jan 22, no email received @Str8shooter (Cancelled)
Order #2241 - Feb 12, no email received @FishnTx (Shipping)
Order #2242 - Feb 12, no email received @Evileyeswatchin
Order #2283 - Feb 26, no email received @WRO

 

Update, I have received notification that mine are in powder coating and will be shipped next week.

 

Yeah....I got nothing...

 

you're next in line.

 

Installed today. Everything was packaged extremely well and the power coat is great, welds are solid too. Easy install with a buddy.

 

Can anyone who has these installed please post a close up of all the mounting points on the driver side?

Installed over the weekend and look great, but having an issue with fitting on the driver side. I can’t manipulate the sound when parked but definitely having some banging around when even going over minor bumps. Not sure if I missed a bolt and would really prefer to not have to drill into the bottom of the frame if I don’t have to.

Thank you!

 

Pic to show it was worth the wait

 

Look to see if the slider is hitting the pinch welds under the doors... The cab is on rubber bushings so it moves when you drive.. could be hitting the slider..