What Have You Done To Your 2nd Gen Tacoma Today?

I think you got em. I use a 12ga but stick with whatever works for you!

 

Tire pressure's off and your e brake is on. Also you're gonna need gas soon.




Just messing with ya haha cool that you caught that!

 

Got my swingout built and installed yesterday. Still need to add a few things to it before paint, but it'll carry my spare now!

 

The shift knob with the boot looks good man!

 

Took the Taco in for an emissions check.(another way for the state to empty your pockets$20.00).
Passed with with flying colors ,good for two years.
TOMB

 

Link for the light? Looks good.

 

Hey i just found this post and looking to do the same with my rtt and cap. Quick google search did not bring up. You got a link or can tell me where you got that rack.

 

Cleaned the Mud from underneath her, Redneck Style

 

Somebody needs to take the tintable bedliner away from you

 

I like it

 

Thanks man. Here you go.

iCreating Battery Operated LED Strip Lights - Cool White USB LED Light Strip Kit with 6.6FT 2M SMD 3528 IP65 Waterproof Super Bright LED Tape Light, Battery Box

https://www.amazon.com/gp/product/B07CW6R1CY/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

 

Found a small leak at the rear of my oil pan.

 

I've got LED headlights, turn signals in the front and back, reverse lights, DRL LED fillers for more than 2 years now and never had any issues with that. Just got to make sure you get them wired in right and have the right parts

 

Thank u sir. And Amazon too. Even better

 

You know at your local, quality, Automotive Supply Store... I'm sure they have bottle of something to cure this.
Just look for the words BEST, Miracle, or Rated #1 by C&D, and it will probably less then $8.95, then you'll sleep better tonight.

 

Btw, how bad is it weeping?
A 14 with a good life it could be expended.
If your over 100K then 1qt/5k wouldn't be surprising.

 

Took a shit load of brick to the dump, so I finally got to weigh my truck. Any guesses?






Changed how I secure my tire. The stand was way too wobbly and I didn't want to go through trial and error to get it, so I went the simple route. I can still put my feet next to it so I can sleep in the bed.








Custom 2" diameter 1/4" thick steel washer cut on the plasma table






Secured my chainsaw






And finally, replaced the bolts that hold my cap down. As you can see they're a bit bent, so I cut them off and replaced with grade 8.

 

Barely leaking. My 2014 only has 53k miles on it. I just cleaned the area off and am going to monitor it to see how it goes. Checked engine oil and still toward the upper end between the dots on the dipstick.

 

That way of securing your tire looks a lot better than the stand. Cute little chainsaw

 

It's perfect for the trails! 12" bar and no messing with carrying gas or starting it. I've used it so much.