What Have You Done To Your 2nd Gen Tacoma Today?

Hit 6k on the odo and had a damn road rock pierce the skin on my driver side A-post. Damn rock took a chip out all down past what looks to be the silver

 

Yeah I saw that one. Not sure if I like the looks or it it could have helped that rock flying my way at 50+mph ..

 

Got the accelerator recall, the rear leaf tsb at the stealership, then came home and installed an aal, then tore off the front suspension and took them to get compressed and spacers installed. Should be finished tonight!

 

Toytec lift, complete!

 

Filled my 10 and 20# CO2 tanks for $53 - sounds pricey to me! Oh well, live and learn. Anyone know of good place to get CO2 in HB or nearby? Thanks!!!

 

to go along with the deckplate mod, it takes air directly from the cab when the plate is installed. I didn't do this originally to my truck, but it wasn't done very well before and wasn't sealed from airbox to cab, so I perfected it and made it look pretty.














found a bolt on my front diff not just loose, but backed halfway out!! Torqued it back up and a couple other bolts on the diff that were a little loose as well

 

Truck was starting slow, so I drove to Advance to get the battery tested....their little machine thing said it had 0CCAs....I guess our trucks dont need batteries to start?

20% is now on my front windows. Now all I need is black wheels, blacked out lights, and to paint my red slider and it'll be a bro truck

 

Only one of em is red

TSC anti rust primer FTW!

 

TRD Exhaust....

It took like 20 minutes like everyone says. Easiest exhaust job I've ever done.

 

got some new tires...for free

 

Worked on the front brakes. Swapped out the warped stock rotors with shiny new slotted ones from SP Performance and replaced the pads with Hawk LTS ones. Much better now, no more vibrating and shaking under braking.

 

Washed, polished, waxed and now doing some painting

 

what did you paint? mirrors?

 

Got my truck back from the dealership with a brand new set of 4 leaf TSB leaf packs!

 

Washed, vacuumed and cleaned the windows.

 

Panel by panel washed it with Optimum no-rinse was & shine, dried it and when all was set and done finished it off with Opti-Seal.
Washed the rims, put some nice 'wet tire' stuff on, and cleaned the windows with Invisible glass.

First time I washed it since I bought it. 6100 miles and counting.

I'm taking some glamor pics tomorrow

 

Just installed new(used) Pro Comp M/T's. got em on CL for $140.00. and bought Chrome TRD exhaust tip for $30.00. will install tomorrow.

 

Found out why my CEL keeps popping for P0136 or whatever it is for the rear O2 sensor. Both nuts are completely missing from the studs, so the sensor just bounces around... fucking awesome. Need to figure out what size & thread pitch they are to replace.

 

Just installed a 2" stainless steel class III ball and hitch

 

I haven't gotten one of these yet 'cause I don't know what kind to get with my 3" lift. Are there universal rules about how far up the ball need to be?
Do I just need a 3" drop to to with my 3" lift, or do I need to buy a 5" drop?
Don't want to hijack the thread. pm is fine. Thanks!