Complete 3rd Gen Front Bumper

Victory 4x4 Strike

 

Monkeyevil- Have tried a few times from 2 different browers to use your website to ask shipping for a no hoop bare steel front bumper. (25425)
Oh..when trying to submit I get "invalid token". Regards.

 

Thanks for letting me know, I'll take a look in the morning. Freight usually runs 150-200, but we don't have a good way to quote it online. If you want an exact quote shoot me a PM with your zip

 

In a frontal collision, will the forces be transmitted directly into the frame? Don't want to defeat the crumple zone. And don't want to cause unnecessary frame damage.

 

Demello makes an aluminum front bumper

 

Yeah I know, that was my first choice before I saw the brute force bumpers

 

Here is the dissent offroad aluminum bumpers all coated up and wired!
Front weighs in at 45lbs! Rear about 20lbs we will offer in steel and aluminum.
This one has an optional 20" light bar in the bumper that may not be compatible with some winches, we installed a warn zeon 10k platinum, custom flip up license plate mount and optional stinger. Also before anyone asks, the license plate is a the customers home town in Pakistan.

 

That proline link takes you to a different bumper

 

I’m interested in the rear if I can keep all of my sensors

 

Thanks for this great thread! This is my first post on TW. I've been trolling for years, learning, experimenting. Thanks to all who share their experiences!

Anyhow, long story short is I was rear-ended a month ago and had to let go my 1997 Tacoma. I am now in tremendous debt on KoKo, my new 2019 Tacoma.

**Let the rebuild begin**

I installed the ARB Summit bumper on my old rig after hitting a deer 2 summers ago. I'd like to get a front bumper on the new one, asap. I do not off-road much, and need the bumper with loops primarily for wildlife prevention. (In fact, I was rear-ended on the highway after someone _else_ hit a moose, and I slowed down.)

Anyhow, out of the options listed by the original poster, I see my choices as: C4 Fab Overland, ARB Summit, or Mobtown offroad.

The Fab Fours seem to cover the front sensor. The Exped 1 seems great, but is only listed for 2016. Does anyone know if it's compatible with newer years?

What are folks' experiences with these 3 bumpers? I have confirmation from ARB and C4 that both will not block the front sensor.

Which is better for performance? Weight? What you get for the money? Style/design for my purposes?

I'll be drop shipping the bumper to my local shop for install, since I am not mechanically inclined. I might add a winch, but that's it. I like the ARB integrated fog lights, as it seems close to the original bumper design. The "light bar" deal on the C4 seems beyond my Inner Redneck. Not sure what value it would add for me; could someone please educate me on the purpose of light bars?

Cheers & thanks!

 

Woooohoooo. We made the cut. Thanks for considering our bumper. And welcome to TW. Where are you located?

 

Montana

 

Love my Dobinsons front bumper....

 

I like that bumper too. We studied that one pretty hard when we were design ours.

 

I am happy with my Demello aluminum front bumper.

 

Nice thread OP!! I do have a question as i am in the market for a bumper/winch.. do full front bumpers interfere with airbag sensors?? Asking for a friend

 

mybad guys. ill try to update this thread in a couple weeks.

 

Here’s another one for the list. This if offered by Runnin4Tacos (https://www.runnin4tacos.com/products/hybrid-front-bumper-2016-2019-toyota-tacoma) and starts at $1300. It’s made by Lil B’s Custom Fab (https://www.lilbscustomfab.com/product-page/tacoma-3rd-gen-hybrid-bumper).

 

To me, this is the best looking so far.

 

I'm eagerly waiting on an ExpOne front bumper with full hoops - currently in finish stage at the factory!!!! Lots of deer here in Central TX Hill Country so I want protection from them too. I did a lot of searching and was certain that I was going with the C4 but earlier this year had a deer jump into the side of my front end. Since the C4 hoops angle forward, they wouldn't have protected the area that got damaged so I started looking again. Roger at ExpOne was great answering all my questions and I finally decided on going with them since their hoops wrap around the most of anything I found. Lost the light bar cutout that the C4 has but I'm planning on getting an aftermarket grille that will accommodate a light bar higher up (probably DB Customz Special Ops).