What Have You Done To Your 2nd Gen Tacoma Today?

reefclimber · May 13, 2019

Rexfordian13 said: ↑

I’ve got the backpacker, needs larger fuel cans but lasts forever. We even using when we are out on the patio at home.
Click to expand...

Went out the next day and got the backpacker specifically because of the larger fuel cell.

reefclimber · May 13, 2019

fasteddieyj said: ↑

Had never heard of these before seeing it here. I've been looking at them the last couple of days now and might just try one out. How do you guys that use them like them and how well do they work?
Click to expand...

So far its been good. Two camping trips and hanging out on the porch

apoteker · May 14, 2019

Changed the oil... 2nd time and thought I had the oil plug. But dammit if I didn't drain the transmission fluid by mistake! I had been putting it off anyways so I guess the truck was telling me something. Got the both oil and atf replaced now. I won't make that mistake next time the oil is due!!

GlennHaggis · May 14, 2019

la0d0g said: ↑

You should have dumped it at the muffler.
Click to expand...

It dumps just aft of the axle and well clear of the spare, so no melting issues. One less thing to hang up on snags in the trail.

jsucraig · May 14, 2019

13txtaco said: ↑

Trd everything
Click to expand...

Like those old school Toyota Stripes

GlennHaggis · May 14, 2019

jsucraig said: ↑

Like those old school Toyota Stripes
Click to expand...

jsucraig · May 14, 2019

13txtaco said: ↑

Trd everything
Click to expand...

Where did you get them?

la0d0g · May 14, 2019

jsucraig said: ↑

Where did you get them?
Click to expand...

Cboy808 can make them, etsy, ebay. Take your pick.

Caliph420 · May 14, 2019

Finally got around to wiring up my fog lights

jproffer · May 14, 2019

steveo27 said: ↑

Ordered new longer rear shocks

And finally glued up my DIY road shower.

I’ll pressure test it tomorrow once it’s cured.

Pretty confident it’s all glued up well. I really slathered up the joint for the filler since it’s not an over lapping joint.

I still need to design a mount that’ll hold the shower head, but I need to mount it to the truck first to get the angle right.
Click to expand...

I glanced at the picture after reading the first line and thought "DAMN, he DID get longer shocks"....but then saw it was pipe lol.

jsucraig · May 14, 2019

la0d0g said: ↑

Cboy808 can make them, etsy, ebay. Take your pick.
Click to expand...

Yes, I have helped elevate connor's sticker making career.

jwhit2848 · May 14, 2019

Seabass said: ↑

Got my new custom Avid Off Road bedrack done and swapped in for my old bedrack on Saturday. This thing is amazing and built like an absolute tank. Jerry Can cages that lock, a mount for my small propane tank, 6 gusseted mount tabs for my Alu-Cab tent instead of only 4 so I could add a 3rd mount rail under the belly of the tent instead of just the ends. This new rack is so much more stable than my previous one and really handles the tent and awning setup well.

My Partner Steel stove included hose reaches from my stove on the tailgate to the propane tank without having to remove it from the mount. I just screw on the hose and turn on the tank.

Also installed 2 surface mount LED flood pods under the floor of the tent over the tailgate for some great light for camp and for night fishing. I ran them through a metal latching switch with an LED ring that's hard wired to the tent's power so when I plug the tent into one of my bed-mounted cigarette lighters, I have ready power for everything when the truck isn't running. The button for those flood pods is right back by them for easy access. Everything wired cleanly under the bedding of the tent and I used tons of heat shrink and shielding after soldering the connections. The LED button is always lit up when the tent is plugged into the truck so the switch for the floods is easy to find in the dark.

I also removed my 2" closed cell foam mattress topper from the tent and replaced it with a 1.5" cooling memory foam topper which allows the lid of the tent to close SO much better and it's more comfortable than the other topper. While doing that, I ran 2 15' USB cable extensions from the tent's USB ports up to the head end of the tent. Quick access to phone charging and whatever else I need to plug in overnight like my headlamp. I also have 2 extra USB ports if I need them later for other devices.

Click to expand...

Do you have a link to this bed rack?

diabetiktaco · May 14, 2019

Getting ready for a new bumper. Took the rigid fogs off the front and put them on ditch brackets last night. Center lights are going and will be replaced w/ a 20" light bar.

Naumoff42 · May 14, 2019

SR-71A · May 14, 2019

steveo27 said: ↑

Ordered new longer rear shocks

And finally glued up my DIY road shower.

I’ll pressure test it tomorrow once it’s cured.

Pretty confident it’s all glued up well. I really slathered up the joint for the filler since it’s not an over lapping joint.

I still need to design a mount that’ll hold the shower head, but I need to mount it to the truck first to get the angle right.
Click to expand...

What PSI safety relief valve did you go for?

Rick_Taco · May 14, 2019

captainbuttfloss said: ↑

Ok guys, might have a dumb question, and didn't want to start a whole new thread on it so I figured I'd just ask in here and maybe someone could answer or point me to the right post. So a couple months ago I finally upgraded from the stock 245/75/16 tires to 265/75/16. Lucky me just got a razor blade stuck in the rear left and it's pretty done. I ordered a new tire from Sams (as I want 4 of the same Cooper Discover AT3 4S) and have to wait up to a week for it to come in. Would it be ok to drive around town with the spare smaller size till the new one comes in? Thanks
Click to expand...

It will be alright for a few days.

Naumoff42 said: ↑

Click to expand...

That sucks for as low of mileage on an engine as you have.

Check out post 177073 if you would like a comparison to mine. I am going to do the TBN and TAN next time.

That's some expensive oil too, just had to look it up!

Dan H · May 14, 2019

Some daylight pics.
I have a few spots that need touched up.

CHUOX17A · May 14, 2019

So I got around to work the front brakes last night. I noticed that there is I my one rattling spring in the bottom and was wondering if I am missing one on the top since the pads have the holes and everything to fit a top spring on it. I got an extra spring to poco on the top par or the pads.

Is this ok ? Or should I leave it just with the bottom ones ?

Seabass · May 14, 2019

jwhit2848 said: ↑

Do you have a link to this bed rack?
Click to expand...

It was custom made by Avid

13txtaco · May 14, 2019

jsucraig said: ↑

Where did you get them?
Click to expand...

Etsy

https://www.etsy.com/listing/674298227/universal-grill-decals?ref=shop_home_active_1

Log in or Sign up

Welcome to Tacoma World!

What Have You Done To Your 2nd Gen Tacoma Today?

#177581
reefclimber Well-Known Member

#177582
reefclimber Well-Known Member

#177583
apoteker Well-Known Member

#177584
GlennHaggis Doesn’t play well with others

#177585
jsucraig Well-Known Member

#177586
GlennHaggis Doesn’t play well with others

#177587
jsucraig Well-Known Member

#177588
la0d0g Its 4 oclock somewhere

#177589
Caliph420 Well-Known Member

#177590
jproffer Well-Known Member

#177591
jsucraig Well-Known Member

#177592
jwhit2848 Well-Known Member

#177593
diabetiktaco Instalander

#177594
Naumoff42 Well-Known Member

#177595
SR-71A Define "Well-Known Member"

#177596
Rick_Taco I'll do it myself

#177597
Dan H Wife thinks I'm having an affair with my Tacoma

#177598
CHUOX17A Well-Known Member

#177599
Seabass Give it to me. I'll break it for you

#177600
13txtaco Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

What Have You Done To Your 2nd Gen Tacoma Today?

#177581 reefclimber Well-Known Member

#177582 reefclimber Well-Known Member

#177583 apoteker Well-Known Member

#177584 GlennHaggis Doesn’t play well with others

#177585 jsucraig Well-Known Member

#177586 GlennHaggis Doesn’t play well with others

#177587 jsucraig Well-Known Member

#177588 la0d0g Its 4 oclock somewhere

#177589 Caliph420 Well-Known Member

#177590 jproffer Well-Known Member

#177591 jsucraig Well-Known Member

#177592 jwhit2848 Well-Known Member

#177593 diabetiktaco Instalander

#177594 Naumoff42 Well-Known Member

#177595 SR-71A Define "Well-Known Member"

#177596 Rick_Taco I'll do it myself

#177597 Dan H Wife thinks I'm having an affair with my Tacoma

#177598 CHUOX17A Well-Known Member

#177599 Seabass Give it to me. I'll break it for you

#177600 13txtaco Well-Known Member

Products Discussed in Entire Site Forum: 2nd Gen. Tacomas (2005-2015) Thread: What Have You Done To Your 2nd Gen Tacoma Today?

#177581
reefclimber Well-Known Member

#177582
reefclimber Well-Known Member

#177583
apoteker Well-Known Member

#177584
GlennHaggis Doesn’t play well with others

#177585
jsucraig Well-Known Member

#177586
GlennHaggis Doesn’t play well with others

#177587
jsucraig Well-Known Member

#177588
la0d0g Its 4 oclock somewhere

#177589
Caliph420 Well-Known Member

#177590
jproffer Well-Known Member

#177591
jsucraig Well-Known Member

#177592
jwhit2848 Well-Known Member

#177593
diabetiktaco Instalander

#177594
Naumoff42 Well-Known Member

#177595
SR-71A Define "Well-Known Member"

#177596
Rick_Taco I'll do it myself

#177597
Dan H Wife thinks I'm having an affair with my Tacoma

#177598
CHUOX17A Well-Known Member

#177599
Seabass Give it to me. I'll break it for you

#177600
13txtaco Well-Known Member

Products Discussed in