Keystone State Thread

One of mine was pink

 

Careful w/ that. If I don't remember and am wearing shorts I remove a layer or two of skin from my leg every time I get out.

 

Gah!

ARB fog lights are H4, factory are H11. I don't think anyone sells the female connector to plug into the existing harness so I don't have to cut the factory plugs off.

 

I am sure someone sells them.
Google

 

I'm realizing H8 = H11. Automotive electrical connectors aren't my thing.

 

Aliexpress.com
Skyjoyce

 

The 3rd gen ARB are actually true H4 plugs, unlike the 2nd gen which come pigtailed.

 

Fair enough. I actually have a full loom from ARB so I'll probably splice it way up in the engine bay. Need to grab some heat shrink while I'm out this weekend.

 

I'll probably never be in the area. I'll just buy a pile off Amazon so I have it.

 

I made an adapter harness for the KC cube led's I have in my bumper with sockets available at pep boys and about 10 minutes. as long as the connectors are good you shouldnt have any issues with corrosion and if you are worried a little dialectric grease in the socket will go a long way.

 

Thats is something to consider!

Thanksfully I never wear shorts but my with and kids do..

 

thanks again @loosnut for the bike shop recomendation; I truthfully never made it to the shop you mentioned; by the time I went to Martins and Green Mtn. Cycles I realized there was nothing under 1,000$ at either locations and I just couldn't pay that mark up... ordered off bikes direct; they had a badass gravel bike in stock 475$ shipped to my door. These bikes come 90% assembled so as long as you understand cable tension/adjustment of the derailleur its breezy... 58cm motobecane gravel x2

 

looks clean.

 

Get it!

 

So, anyone planning on attending that
2nd Annual Koch 33 Truck Show Sunday, June 2nd 2019?

Surely would be nice to see y'all there

 

Damn wanted to go to that this year. But got a bike thing that weekend.

 

Sucks...
This thing isn't really getting much traction this year. I'm going to drag my family with me and hopefully have a good time.

 

I’ll be fishing the PA grand canyon hopefully.

 

Yea, I think they admitted voting screw up, supposed to be changed/fixed this time around.
We'll see

 

What’s up guys! got a quick question is there a shop around here that you guys all go to that specializes in Tacoma’s, Like for lifts etc? Or do most of you guys work on your truck at home?