Best way to address Tacoma lean?

So the previous owner of my 2013 must have been some kinda big boy, because there's an obvious tilt to the driver side when viewing from the front and rear. There is a spatial difference I was able to measure between the back rear tires and the wheel well so I know it's not just in my head.

What are some budget recommendations to evening it out? Thanks in advance for the help.

*edit, stock suspension no lift.

 

put 600lbs on your passenger side

 

It’s from your gas tank, not the previous owner

 

you have the best signature

OP, do you have any lift or stock suspension?

 

I edited my post, stock everything.

 

Get a plus sized lady friend to ride passenger

There is small spacers made to correct this believe it’s called a trim pack. Maybe someone else can chime in on that. Not to familiar with it.

 

If you measure from the centre of your hubs up to your fender that will show the different heights your dealing with.
If you have a 1/2 inch difference between the front wheels you can get a 1/4 inch spacer to put on the lower side.

 

Lots of spacers like this one out there to address the taco lean:

$27 Wulf Individual Front 1/2" Leveling Lift Kit Driver Lean Spacer compatible with 2005-2020 Toyota Tacoma 2WD 4X4

https://www.amazon.com/gp/product/B07JBBWJLW/

Some are aluminum, mild steel, or some polymer ones, depending on how fancy or blingy you want to go. I ordered this one because it was cheap and came with neat wolf stickers

 

Yup, top hat spacer. Simple and easy. You will need an alignment after install, which could open a bigger can of worms if your lca cam bolts are frozen. Fill your gas tank, get someone your size to sit in the drivers’ seat, park on a level surface and measure from the center of the hub to the top of the fender on both sides and compare the numbers. Buy appropriate spacer to even things up. *Important - the spacer will lift twice it’s thickness, ie a 1/4” spacer will give a 1/2” of lift.

 

Fixed

 

To be honest this seems much more pronounced than most taco lean "cases" I've seen.. maybe it's just the pictures

 

Agree. It looks like maybe a broken leaf.

 

Leave your truck alone,it looks fine,a full tank of gas will cause taco lean even if you have it corrected on empty tank.

 

Maybe need to put a level on the bed of the truck so we can see how far it’s leaning. Pictures don’t really show any lean

 

Nah, just have a smoking hot lady friend ride passenger and just accept the lean

 

Measurements would be good. Personally it looks like a ton of lean to me (way more than the "taco lean") but that could just be the pictures

 

Look at the rear mud guards, you'll see the obvious height difference.

 

Did you check the rear leaf springs, like someone else suggested?

 

Yeah I was under there trying to find a squeak and got real familiar with each leaf as I cleaned them out and sprayed. They all appeared to be intact.