1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Shockwarehouse.com - anybody else having problem contacting them? Best lift for the $$ (brand) Bilsteins for Taco 06 4x4 Leads???? 3rd gen Rancho Loaded quickLIFT RS999915 on 285 70 17 Extra Weight in bed - Need Suspension Advice Shocks for a heavily modded 05 lifted Tacoma? (lots mods)

1" aal?

Discussion in 'Suspension' started by LonghornTaco, Oct 14, 2008.

  1. Oct 14, 2008 at 7:50 PM
    #1
    LonghornTaco

    #1
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Can I get a 1" AAL?

    Stock, the back appears to be about 2" higher than the front. I'm putting a 3" lift on the front (maybe 3 1/2") so that will put the front 1 to 1 1/2" higher than the back. Then, I'm doing the read TSB, raising the back about 1"-ish. So, the back is still going to be potentially lower than the front, especially after then back settles. And I actually like the back being a touch higher...

    But ToyTec sells a 2" AAL. Anyone know of someone offering a 1" AAL?
     
    LonghornTaco, Oct 14, 2008
    #1
  2. Oct 14, 2008 at 8:16 PM
    #2
    Ridingontrd

    #2
    Ridingontrd Well-Known Member

    Joined:
    May 7, 2008
    Member:
    #6459
    Messages:
    7,945
    Gender:
    Male
    First Name:
    Richard
    Laughlin,N.V
    Vehicle:
    trd sport 4x4 w/towpkg
    aFe prodry,Dynomax ultra flo ss,Scangauge2,Demello front bumper,BudBuilt skids,sliders(local)AllPro rear bumper,Wet O's cobalt blu,w/halfpiping,TRD logo in gold,R/L hood struts,5150's@10"aal 3 pack,T/C uca,Light racing c/o,1"diff.drop,de-badged,
    If you're not doing any heavy towing,why not scratch the tsb leaf & just go w/ the 2" aal?? That would leave a 1" rake.:)
     
    Ridingontrd, Oct 14, 2008
    #2
  3. Oct 14, 2008 at 8:19 PM
    #3
    LonghornTaco

    #3
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    I thought about that, but I'd rather not limit myself on load capacity...

    Of course, I could just get the 2" AAL and maintain the stock 2" rake...
     
    LonghornTaco, Oct 14, 2008
    #3
  4. Oct 14, 2008 at 9:00 PM
    #4
    roadbiker

    #4
    roadbiker Member

    Joined:
    Oct 6, 2007
    Member:
    #2946
    Messages:
    6
    So. Calif.
    Vehicle:
    09 TRD DC Sport 4X4
    885's, AAL, Snug Top SL, 3M Clear Protect
    Hey Jason,

    I just put the 3" Toytec kit on my 09 DC 4X4 Sport on Sunday. The AAL's lifted the rear 3", but I'm guessing it will sag some eventually. I put 5100's all around and used stock settings in front with the OME 885's and got 2.5" of lift without putting the added spacer in. I'm planning on modifying the AAL's to not lift as much cause it's a little tail high right now, but I'll wait a few weeks first. I saw your other post about the difficulty of this install, I would say get someone who works on cars to help you. Just a tip, I took the front shock assy to Pep Boys and they compressed the springs for $20 each, 4 wheel parts wanted $240 and an appointment (they are such a rip off) to do the same thing. The rental spring compressors you find at most auto parts stores will do honda springs easily but these 885's are pretty stout. I have my own compressors and they wouldn't fit the 885's very well cause of the thickness and relatively tight windings. If anyone can tell me how much I can expect the AAL's to sag please let me know. Thanks, George
    :D
     
    roadbiker, Oct 14, 2008
    #4
  5. Oct 14, 2008 at 9:15 PM
    #5
    LonghornTaco

    #5
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Thanks for the heads up about Pep Boys. That might be worth the $40 simply from a safety perspective... I'll call them tomorrow.

    Also, you mentioned for me to "get someone who works on cars to help" me. Exactly which part of the install did you (or you think I might) find challenging? I have read a lot on the topic over the past two weeks and between that and watching a few videos on YouTube, I think I have a pretty good grasp on what's involved. Of course, it's always the stuff you don't know or anticipate that will bite you (hence the reason I'm asking :) ).
     
    LonghornTaco, Oct 14, 2008
    #5
  6. Oct 14, 2008 at 9:32 PM
    #6
    roadbiker

    #6
    roadbiker Member

    Joined:
    Oct 6, 2007
    Member:
    #2946
    Messages:
    6
    So. Calif.
    Vehicle:
    09 TRD DC Sport 4X4
    885's, AAL, Snug Top SL, 3M Clear Protect
    Hey Jason,

    I really helps just to have an extra set of hands, for example just getting the shock assy out of the lower cup you have to push down on the lower a-arms pretty hard just to get enough room to get the shock assy out. I did it myself, but found I was using knees, feet, what whatever apendage I had to push or hold parts while manuvering the assy out. I did find that the 5100's were even tougher to get in, and that's without having the extra 1/2" spacer on top. I'm not sure I would have felt comfortable pushing down that hard on the lower a-arms the get enough room to get the shock in with the spacers on top. I'm not sure if it's just the rubber in the a-arm bushings that don't allow the a-arms to just swing down, but they don't. And yes, I did take the 2 bolts out of the bottom of the wheel assy that attaches to the a-arm. Any other questions, be glad to help while it's still fresh in my mind. George
     
    roadbiker, Oct 14, 2008
    #6
  7. Oct 14, 2008 at 9:38 PM
    #7
    JimBeam

    #7
    JimBeam BECAUSE INTERNETS!! Moderator

    Joined:
    Apr 14, 2008
    Member:
    #5966
    Messages:
    52,076
    Gender:
    Male
    First Name:
    JB
    Vehicle:
    2015 Tundra
    a little trick i learned and tried to teach will when we did his (this works for 1st gens...unsure of 2nd gens)

    If you leave the spindle attached etc and ONLY undo the coil/strut hardware...and you need to move the lca down to pull the assembly out of the coil bucket, if you put your bottle jack upside down in the fenderwell between the fender and the uca...you can jack the arms down enough to get the coil in and out relatively easy
     
    JimBeam, Oct 14, 2008
    #7
  8. Oct 14, 2008 at 9:39 PM
    #8
    LonghornTaco

    #8
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Thanks a ton! I am already lining up help to perform the install, but didn't know if you were meaning I needed an extra set of hands or if there was some secret mechanical knowledge that was needed...

    How long did the install take you? I was planning to start it on a Friday after work so that I could take it in for alignment on Saturday.
     
    LonghornTaco, Oct 14, 2008
    #8
  9. Oct 14, 2008 at 9:41 PM
    #9
    JimBeam

    #9
    JimBeam BECAUSE INTERNETS!! Moderator

    Joined:
    Apr 14, 2008
    Member:
    #5966
    Messages:
    52,076
    Gender:
    Male
    First Name:
    JB
    Vehicle:
    2015 Tundra
    having absolutely ZERO knowledge of what i was doing, I installed my Sway-a-ways and 3leaf aal in an afternoon
     
    JimBeam, Oct 14, 2008
    #9
  10. Oct 14, 2008 at 9:44 PM
    #10
    roadbiker

    #10
    roadbiker Member

    Joined:
    Oct 6, 2007
    Member:
    #2946
    Messages:
    6
    So. Calif.
    Vehicle:
    09 TRD DC Sport 4X4
    885's, AAL, Snug Top SL, 3M Clear Protect
    Hey Tigerfan,
    Never thought of that, I'll have to remember that one. Thanks
     
    roadbiker, Oct 14, 2008
    #10
  11. Oct 14, 2008 at 9:44 PM
    #11
    LonghornTaco

    #11
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    That's kinda what I figured. It really doesn't look very involved when you get down to it.
     
    LonghornTaco, Oct 14, 2008
    #11
  12. Oct 14, 2008 at 9:52 PM
    #12
    JimBeam

    #12
    JimBeam BECAUSE INTERNETS!! Moderator

    Joined:
    Apr 14, 2008
    Member:
    #5966
    Messages:
    52,076
    Gender:
    Male
    First Name:
    JB
    Vehicle:
    2015 Tundra
    once the spacers are on the coils...thats an easy step to put the coils in

    the aal is a little bit trickier in that you have to make sure to put c clamps on the leaf pack to keep them lined up...

    both times ive done suspension work, ive had issues putting the rear shocks on...i eventually get it but sometimes i have to really wrestle and fight the shocks to go onto the tabs
     
    JimBeam, Oct 14, 2008
    #12
  13. Oct 14, 2008 at 9:52 PM
    #13
    roadbiker

    #13
    roadbiker Member

    Joined:
    Oct 6, 2007
    Member:
    #2946
    Messages:
    6
    So. Calif.
    Vehicle:
    09 TRD DC Sport 4X4
    885's, AAL, Snug Top SL, 3M Clear Protect
    Hey Jason,
    It took me longer than tigerfan. Probably 6 hours considering I had to run to Pep boys for the compression part. Remember when working on cars, something always goes wrong, gets stuck, or you find you you're missing 1 tool.:eek: Don't forget to lock tite the fasteners, don't want something falling off out in the middle of nowhere. George
     
    roadbiker, Oct 14, 2008
    #13
  14. Oct 14, 2008 at 9:53 PM
    #14
    chris4x4

    #14
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,691
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    As for the 1" AAL, see if you can have a local spring shop make you one.:)
     
    chris4x4, Oct 14, 2008
    #14
  15. Oct 14, 2008 at 10:02 PM
    #15
    LonghornTaco

    #15
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Do I need to torque any of the bolts or just tighten real good?


    I think I'm gonna go with the 2" AAL for the back. They come in pairs (one for both sides), correct? ( )
     
    LonghornTaco, Oct 14, 2008
    #15
  16. Oct 14, 2008 at 10:04 PM
    #16
    chris4x4

    #16
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,691
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Yep, they are sold in pairs. :)
     
    chris4x4, Oct 14, 2008
    #16

Products Discussed in

KYB SM5640 - Mount Kit
$28.56
Air Intake Snorkel Kit Fit For 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)
$89.99
Toyota Genuine Parts - Joint Assy, Lwr Ball (43330-39815)
$191.42
Toyota Genuine Parts - Joint Assy, Lwr Ball (43340-39585)
$205.09
WD-40 Specialist Protective White Lithium Grease Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ , [1-Pack] (30002)
$14.09
Permatex 09128 Copper Anti-Seize Lubricant, 8 oz.
$13.95
Toyota Oil Drain Plug Crushable Steel Gaskets Set of 10 OEM 12157-10010
$13.99
Toolwiz Universal Adjustable Magnetic Gauge Tool Camber Gauge Wheel Alignment Tool Camber Castor Strut Alignment Pillar for Car Truck RV Auto Tire Repair Automotive Silver
$14.39
Aurora Bearing Spherical Bearing, COM Series, 0.625 in ID, 1.187 in OD, 0.625 in Thick, Steel, Each
$14.99
12"es of Snow
$9.91
Armor All Extreme Tire Shine Gel by Armor All, Tire Shine for Restoring Color and Tire Protection, 18 Fl Oz
$9.99
The Stop Shop Brake Line Clip Set for 3/16" tube. Pack of 10. Steel with Rubber Insulation
$9.99
JUWO 1/4" Flare x 1/4" NPT Male Brass Tube Fitting, Half Union Coupling, Gas Adapter, Durable Brass Pipe Connector
$4.99
Tondiamo 18 Pieces Brake Bleeder Caps Rubber Caliper Nipple Caps Dust Caps Brake Bleeder Screw Covers Grease Fitting Caps for Cars and Motorcycles
$5.59
LOKMAN 20 Pack 5/16" Stainless Steel Cable Clamp, Rubber Cushioned Insulated Metal Clamp, Tube Holder for Tube, Pipe or Wire Cord Installation
$11.99
Dorman 31067 Rear Leaf Spring Inserts Compatible with Select Models, 2 Pack
$13.62
Sta-Lube CRC SL3330 Moly-Graph Extreme Pressure Multi-Purpose Lithium Grease - 14 Oz.
$13.37
ALEOED M12x1.25 mm Self-Locking Nylon Insert Hex Lock Nuts, Pack of 6
$12.99
DuPont Teflon Multi-Use Lubricant Aerosol Spray, 11 Oz.
$13.35
Valvoline Moly-Fortified Gray Full Synthetic Grease 14.1 OZ Cartridge
$12.99
Schaeffer Manufacturing Co. 02742-029S Moly EP Synthetic Plus Grease, NLGI #2, 14 oz.
$13.47
LockNLube LNL134 Grease Fitting Caps, 50 count, Yellow
$9.99
Fluid Film® Aerosol 11.75oz
$9.99
Mayhew Pro 21503 5/16" Black Oxide Extra-Long Pin Punch
$10.89
Tri Flow Dry Lube (2 Oz Drip Bottle)
$10.50
CRC 03007 3-36 16oz Multi-Purpose Lubricant and Corrosion Inhibitor Spray Bottle
$10.39
TEKTON 7/32" Alignment Punch | 66176 | Made in USA
$10.00
ENERGY SUSPN Energy Suspension 9.8108R 3/4" Hourglass Shock Eye Bushing
$10.23
Tri-Flow TF0021060 Superior Lubricant Drip Bottle- 6 oz
$10.59
50 Grease Fitting Caps Yellow Polyethylene
$11.99
Lincoln 5803 Hand-held Grease Gun Needle Nozzle with Hardened Steel Tip, 1/8" Female NPT Thread, 2.76" Length, Used for Lubrication of Flush-Type or Hard-to-Reach Hydraulic Fittings
$11.99
DuPont Non-Stick Dry-Film Lubricant Aerosol, 10 oz
$11.42
Dorman 924-070 Rear Leaf Spring Insert Compatible with Select Models, 4 Pack
$12.41
LOKMAN 12 Pack 1.5" Stainless Steel Cable Clamp, Pipe Clamp, Metal Clamp, Rubber Cushioned
$11.99
Two Control Arm Bumpers and Two Control Rear Axle Bumpers Replace 15153958 905-208 15039397 Compatible with Chevy Suburban Avalanche GMC Yukon Bump stopo
$12.00
Lexus Genuine Factory 2 EMBLEM NUTS 90183-06044
$7.50
Lucas Oil 10320 Marine Grease - 14 Ounce
$8.23
Biaungdo 18x18x30mm/0.7"x0.7"x1.2" Adjustable Right Angle Brackets L-shape Corner Brace Support Black- (15 Pcs)
$7.99
X AUTOHAUX M6 Hydraulic Grease Nipple Fittings Iron Zinc 45 Degree Angled W/Cap - 5 Set
$5.99
Lucas Oil 10005 Red 'N' Tacky Grease - 14 Ounce
$7.48
Valvoline Multi-Vehicle Moly-Fortified Gray Grease 14.1 OZ Cartridge
$8.99
Liqui Moly Long-Life Grease + MoS2 | 100 g | Lithium Fat | SKU: 2003
$9.53
To Top