Colorado B.S. Thread

Probably because you were aiming at the wheels and there's so much space between the spokes.

 

TrackedBRZprerunner?

 

Maybe we need to go in order of her surgeries...

Pre runner + (somewhere in here there was an add-a-dictome surgery) 4 runner + BRZ + tracks = .......

 

....= heavily modified

 

I swear if you stray from Toyota though there will be hell to pay

 

Like when I say I want more power so it’s time to drop in an LS motor?

 

How thick is it? 1/8? Bet it can hold a lot more weight than you give it credit for.

 

DTC shit (not my pic)

 

The clamp is 3/16. But I keep telling myself it is stronger than it looks.

I just don't want my bike to fall off on the highway or something. Carbon wouldn't fare very well against pavement and oncoming traffic.

 

That is awesome!

 

Carbon fiber and you're worried about weight? Overly concerned, I'd say. There's probably a strength specification out there somewhere for your pieces, and give you some peace of mind.

 

Just shows you how traffic in DTC is shit...

 

pretty convenient if you ask me. Prolly cleaner than any of the convenience stores too.

 

Does anybody wash their engine and underhood anymore? Or just me?

 

I probably still have moab dirt from 3 years ago on mine

 

I do this about every other time I was my truck...I just try not to go get electrical components too wet

 

After about every trip I make. I just hose it down quickly.

 

Anybody out there wire up their rock lights to function as courtesy lights? I want to use an on-off-on switch to wire up the lights so that in one of the on positions the lights come on with the dome light I.e. when the truck is unlocked. The other on position would obviously activate them whenever switched to that position. Trying to find a good way to tap into the dome light circuit. I was hoping to use an add-a-fuse on the dome circuit but it appears that fuse is always hot, not only when the dome light is on.

 

Flip it to the ground side?

 

I don’t follow