What have you done to your Tacoma today? 1st Gen Edition

Actually the gas mileage, I didn’t know those size tires would make that big a difference.
I get 20-25 but then I’m in 15” rims.

 

It's less the tire size and more that the E-rated All-Terrain or Mud-Terrains weigh like 30 lbs more.... EACH TIRE... than P-rated street tires.

 

Oh, actually they are braced; separate bracket that bolts between the wings and the mounting bolts. They were laying on the table, but mostly out of view.

 

Yeah it just comes down to weight really, I also have the xtra cab with a bed rack and RTT on the back full time

 

And here is the finale, all bolted up and ready to be bumped. Just waiting on delivery of a folding license plate bracket that will allow access to the spare tire hoist. Damn, need to replace that band of tape that the flap of the window rides on. Looks bad there, but mostly hidden usually. Only been on there 14 years.

 

I have the same bumper and mine doesn’t have that hole...I can access the spare from above the bumper

 

I thought it was too close a fit, so I cut that one. I actually have a piece of plastic pipe that aligns the handle to the hoist. (Don't ask why I needed that improvement, it involves the dark of night and a lot of cursing.)

 

Which brand carpet did you get?

 

And that's unsprung weight as well. Mpg killer

 

I'm anxious to hear your opinion on the before and after with respect to road noise

 

Yeah, I’m curious how it compares to other noise dampening products.

 

So what are you doing to it? LT?

 

Where did you get it from?

 

$140 ebay
https://www.tacomaworld.com/threads/new-design-ebay-snorkel.573571/

 

Nice! Thank you.

 

Just scored

 

Just rebuilding the IFS. The truck sat beside my dad's shop for over three years. Going to go back to DD'ing it so trying to get it back into shape. Changed the timing belt, water pump, plugs, wires, and valve cover gaskets last month. This month is front end rebuild. All new bushings, ball joints, and hardware up front along with carrier bearing and u-joints. Next month is a little body work and getting the flares back on and a full detail. Then the mods will resume again!

 

Drove on a portion of the Baja 500 coarse n got to spent time at Mike's Sky Ranch today. That coarse is crazy. Was fun driving some of it with some good friends.

 

Before
After Now to fill the hole under the liner I'm thinking I'm going to just throw a large street sign over the hole and put some bracing under it

 

Just be sure to let a potential buyer know if you decide to sell it like you mentioned yesterday haha. That would be a crappy surprise lol.

Looks much cleaner now with the bed liner in there