San Diego "Yard Sale"

In need of oem Tacoma 3rd gen spindles and possibly lower control arms
If any one has willing to buy

 

why get rid of the hook, not a bad thing to have as an extra just in case item.

 

I suppose you're right. I just have visions of a recovery and that thing ends up flying through my window.

 

Thats why you put something on the line to keep that from happening.

$67 WARN 91575 Winch Damper with Rigging Accessory Storage Pocket and Reflective Strips , Black

https://www.amazon.com/WARN-91575-W...ocphy=9061184&hvtargid=pla-343408307012&psc=1

 

It's a clevis grab hook rated for 5,400k lbs. It's ideal for chains and lifting. Do not use it for recovery, it will fail.

 

Well theres that

 

Marked in my Wish List on Amazon.

Duly noted.

 

****EDITED SALE, SEE NEXT PAGE****

I have 5 brand new 315/75/16 Duratracs located in San Diego (University Heights). Decided 35's are a little bigger than I wanna go.
$xxxx

 

Damn! Close.... I'm going with 295/70/17 KM3's since I have 17 wheels on it right now. I got gunmetal 16x8 SCS F5's that I'm gonna sell too.

 

If you could get these to fit on my truck I’d take them...

 

I’ve only got a 2” lift but I have a full front bumper. I feel like UCAs, CMC, and gears are just the beginning of what I would need

 

I saw some gusseted ones in the 2nd gen marketplace

 

I can 100% get them ON your truck.... come on down!!

 

5 New 315/75/16 Duratracs
5 New SCS F5 16x8 -25 in gunmetal
SOLD

 

Why not keep the SCA and go with @Titus94 285s? 295s are not a common tire and you get much better sidewalk height with a 285/16 than the width of a 295/17.

 

That's a great question, and trust me, I'm considering seriously considering it, but there's a lot of reasons really...

First off, based off the actual manufactures measurements the sidewall height is only a 0.3" difference for the 295 KM3 (8.4" vs. 8.1") and only 0.1" difference for the Toyo/Nitto compared to his 285 KM3, so really, you're getting the added height at almost no loss of sidewall. Also, BFG's already run small, so in 285's I feel like they are just the tinniest bit too small for 4Runners. Since they run small, they would be perfect in a 305/70/17, for some reason they don't make them in that size. I'm thinking it's because they still have a large stock of KM2's available in 305, so when those all sell, we'll see the 305 Km3. So for now, I think 295's will be a good compromise. None of these sizes are available in 16's, which is a bummer. Going to 35's would make my life easier... because then I would stick to 16's and call it a day, but since I think the biggest I want to go is a small 34, I kind of have no choice but to stay with 17's.... which is what's on my truck right now anyway (265/70/17 of Tundra/Sequoia star rims), so that's easy.

And even with all of that, I might just swap with him for the time being to minimize my loss of $$$, but to be quite honest, I don't like the way the F5's look in person lol. I know everyone loves then! But now, seeing them in person, the style just isn't for me. haha. I think if I had gotten black FN's 5 Stars or all black Ray 10's I'd be down to stay with 16's for a while, but such is life. So if I go with 295's for now, I don't need to buy any more rims and can put that money towards something else... like a rear bumper, which I really do need.

 

To be honest, I don't think you want these 35's. They would make your truck way to big, and pretty much render it useless for anything other than destroying trails, rocks and obstacles off-road, dropping panties, and making your friends look bad. I mean really... parking in the Whole Foods parking lot is gonna be a bitch with these, and you might not fit in those fancy automatic car washes after getting dirty at the mall. It would probably be better to stick with your 285's lol

 

@Titus94 is always trying to compensate for something.

 

Well that's not something I needed to know. I was referring to your height.

 

Anyone near Imperial Beach have a 16in spare wheel for sale?