TTC ☆ OFFICIAL

Exactly what it smells and tastes like

 

+1

Only good if there is NOTHING else....and I mean NOTHING........would rather drink a Colt 45...

 

Mmm Mickey’s

 

Louise Mueller, Is one of my favorites, and the wait is reasonable when busy

 

Ok guys.... idk what the frick is going on here.

 

Appears to be a leaky rear axle seal or something with the breaks.

Have you drove thru any deep water recently with all the rain?

Or maybe glue residue from missing tire weights

 

I’ve driven through many creeks and rivers in the last 3 years, this appears to have happened since I washed it after Jambo. Brakes feel fine pedal wise...

 

Have you done the diff breather relocate?
If not you may wanna pull the fill plug an check you don’t have chocolate milk back there. Will look like this.

 

I haven’t, I’ll have to check that tomorrow. Just did the fluid change like 4K miles ago.

 

Hopefully just over full

 

I know but the water will wreck fluid. The seals will go out due to pressure build up that usually escapes thru the breather. If it’s clogged it’ll find the next weakest link which is the seals.
If that ends up being the culprit Chris @Texoma is the man for work. He’s a mad scientist does great work if you didn’t already know.

 

75 QUOTE="Austinguy, post: 20673306, member: 147756"]Man I talked up Coopers in Llano to my wif e enough to finally get a day trip with her and we went out there for lunch. What a HUGE DISAPPOINTMENT! Some o f the worst BBQ I’ve ever had. Actually made me sick. I’m never going back.

Have any of y’all been to Louie Mueller Barbecue in Taylor? They are pretty good in my opinion.[/QUOTE]
1

Coopers on Mason is the better of the two. Hit them up when I go to the lowes for vittles. (The grocery store in Mason, next door)

Louie Mueller's In Taylor is the best q in 100 miles.
1st visit in 1975 with my dad..

It is real, legit Q. I had a side business in the early 90's deploying PC's and networks up and down 35 and 95. I bet I ate at louies 100 times.

Dammed good Q.

 

I’m going to take it apart tomorrow and see exactly what’s up, then I’ll formulate a plan. If it’s the seal @Texoma will be getting a new customer!

 

Been keeping up and didn't have time to chime in today, I bought an anderson lower and went with.223 wylde to be able to switch both ways. The whole rifle is an anderson and they're no worse that any other brand. There's parts out there for cheap and there's cheap parts. Most will still go bang when you push the button

 

Man, looking for a new job at 45yo and 12 years on the current really sucks Salty Balls!



I've not lost my current job, but the writing is on the wall so to speak. Looking! Looking Hard! (pun intended).

Carry On!

 

Oh, and you folks talkin' 'bout gun builds....if you're looking for High Quality optics at a good price, check out Holosun...

My IG post of mine.

Green or Red, 2 moa dot only, 65 moa circle, or 65 moa circle with 2 moa dot...where I keep it. Quality is on par with optics twice the price!

And mine is solar.

 

Looks like it could be a wheel cylinder (hydraulic unit in your rear drums. I've seen those and axle seals leak like that, but mainly wheel cylinders. Pop your drum off and you'll get your answer.

Holosun user here

 

That’s what my buddy said too, it may be that because my rear brakes are original.... we’ll find out tomorrow! Let me know how that tent works out for you bro!

 

I’m looking at Holosun for my AR10 pistol, not sure which one to go with yet... still researching. I’ve always ran Vortex, never had any issues.

 

Nice! For the price, you really can't beat the quality! Love mine on the LWRCI-DI. I looked at several places around me to build a rifle, but ended up getting the LWRCI-DI for right at $1000. Given they are a Tier1 maker of piston driven rifles, I was pleased to see they made a Direct Impingement rifle for the same price as many other makers, with their quality. Love that rifle! Nail driving son-of-a-gun!