tps light is blinking

after i installed my x runner rims on my 2006 tacoma standard cab it was running ok until a week later when my tps light is blinking. What could be problem??? it was ok for a week until today this happened it blinking all the time??? tire pressure is all good any advice???

 

reprogram the TPS.

 

did you check the pressure in the spare?

 

X2

 

no man they came with the x runner rims why???

 

X2

 

the only stocker is in the spare if it has one does it??? can you re program it yourself???? finally where the write on cutting the wire to the tps system???

 

so just let it blink????

 

I know if you cut it it will just blink forever and youll regret cutting it. Have you aired up your spare? I know mine keeps going off now because I dont have a spare under there nomore. When i put new rims on and the tps it didnt change anything. So Its either the spare or those new tps on the truck. Just dont cut anything!

 

thanks

 

Some tire shops can do the reprogramming. Otherwise electric tape can do the job.

 

Or you can remove all the sensors...there's a strap available that fits like a large hose clamp to secure the sensors to the insde of each wheel. Also, you could do the pipe bomb... Get some pvc pipe and cap one end. Drill and install a valve stem in the cap. Put sensors inside, cap the other end and fill er up to around 32 psi. Strap this thing to the frame or inside a storage compartment. Another method is to get a wheel barrel tire, remove the tire from the rim, throw in the sensors, re-install tire and fill up to 32 psi.

 

mines been blinking since january...you get used to it

 

forgot about that...would he have to get the serial#'s off each sensor for a re-program?