295/75/16 with 0mm offset?

Hi, I am planning on getting the Cooper Discoverer AT3 xlt’s in 295/75/16. I currently have 0mm offset wheels, and plan on keeping them. I am also running total chaos UCA.

Does anyone have experience running this size tire with 0mm offset? I am mainly concerned with rubbing on the UCA or frame, the cab mount and rest can be cut.

Thanks

Edit: I had the tires installed an no issue with the clearance on the UCA. Does rub on the cab mount and fender lining, nothing some trimming cant fix.

 

It won't rub on your UCA due to 0 offset wheels (assuming you have _x8 wheels).
I have 285/75r16 cooper at3 xlts, I didn't have to trim anything not even my mud flaps are still on my truck.

The Body Mount? Probably you will need to get cut...

 

I can’t speak on those tires specifically but I’m running 295/70/17 Nitto trail graps with blistein/Ome 888 coil lift also with total chaos UCAs and 0 offset wheel. I had to do just the normal Cab mount chop. I still have very minoring rubbing at lock with compression. But normal driving is just fine.

 

Awesome guys. That’s what I wanted to hear. Will hopefully be getting these soon. Cheers

 

@ryan05Taco

 

Welcome to the 295 club! You should be fine with 0 offset. I've been running the 295/75 AT3 XLT's in that size as well and have been very impressed thus far! Let me know if you have any other questions.

 

Thanks man. they look awesome on your truck.

 

Thanks!

 

BFG also makes a KO3 in 295 75 16. Thats what im looking at and stoaked to trade up this summer. This post was also helpful for me as well. Thanks.

 

I got my tires yesterday and had them mounted. No issue with clearance on the UCA, need to do the CMC and some trimming of the fender lining. Love the tires though, they look great.

 

Just ordered my rims, about to pull trigger on some 295/70/17 ridge grapplers from Nitto.

What lift are you guys running ?
I do hardly any off-roading. So I’m wondering what route I should go.

 

I have the bilstein 5100’s with the OME 887 coils in the front and an add a leaf in the rear. Gives me about 2” of lift. Rides great and not too expensive. Check out my build thread for more details.

 

J_Anthony_, this ^ sounds like a solid choice for you.

 

Great looking combo.

 

Thank you !

 

Same size and tire