What Have You Done To Your 2nd Gen Tacoma Today?

Im thinking the pro comp struts I have are from the 2.5 or 3in lift. Idk how you do it man I absolutely hate the ride. Feels like i'm riding on pillars and my girl looks like she gets whiplash every time I hit a speed bump any faster than 20mph

 

Threw on a set of 255/85/16 Coopers..a nice change from stock 245 KO2’s:

 

I'm running Pro Comp Pro Runner struts with factory coils. I had the adjuster ring set to hi and it was real stiff and almost maxed out all the time. Flipped it over and it rides smooth with about 2 1/2" up front. It was at 3" before.

 

Tyger side steps... I don’t know if you can call these sliders because they don’t look quite up to par. None the less I like the look and quality of craftsmanship on these new steps.

 

Some maintenance on the black trim.

 

It's quick...took all of 15 minutes to do it.

 

Out with the old and in with the new. Little air filter change was needed badly.

 

For me yes.

 

Any of you access cab guys add speakers to your non spekered access doors? Took the panel off & there's a blank spot for speaker for where it should be ran

 

My access doors have speakers. Thought that was normal from the factory lol, also running a JBL stealth box in the middle console, sounds decent for a low powered 10in I'd recommend it

 

Tinkered with my fridge setup

 

Replaced a rear shock today. It was dented (still ok)...an easy and cheap swap.

 

Finally got my seat covers in

 

New shoes 265/75/16 Dutatracs

 

Just washed and waxed the truck so I thought it would be a good time to do my first official post of pictures of my 2015 Tacoma TRD Sport and the things I added to her

DNA Monitoring projector headlights, LED headlights and fog lights, LED turn signals and parking lights, front parking camera, TRD Pro 17" Gray Wheels, Michelin Defender All-Season Tires

Volant Cold Air Intake w/ Ram Scoop, Unifilter mod, Viper Smart Start System and Security

Front and Reverse Camera interface, TRD shift knob, Heated front seats, reverse parking sensors socket receiver

Pedal Commander, Radar Detector mute button, new brake and gas pedals

Hardwired dash cam and radar detector, Eclipse Sunshades

Smoked Rear Taillights; LED reverse lights, license plate light and turn signals; chrome tip exhaust; pull out bed step up; hitch reverse sensors; Roll-N-Lock bed cover

 

do you have a link to the wheel cover?

 

Well after 6 hours I finally got my new rotors and pads on. Pins were completely seized on the driver side so I tried cutting and drilling it out. Didnt go so well so I ran to O'Reillys and got a replacement. $87 later I now have one silver and one black caliper. Thought I was going to have to replace both but broke the passenger side pins free right before my wife got home to take me to replace the driver side. Tried bleeding the brakes with her but things are still a little squishy so I need to get a vacuum kit to finish them off. Just waiting for the primer to dry on the hitch receiver before hitting it with some black paint. Got the lawn mowed and am too tired to do anymore work on the truck. Luckily its a 3 day weekend so I can finish up greasing zerks and inspecting the rear brakes tomorrow.

 

Love your truck! Where did you get the TRD neck pillow?

 

Thanks man, they’re 33/12.5/17. They ride really nice for a mud terrain.