Needed: 05+ Tie Rod ends @ a Good price!

I have 06 4x4 DBL Cab long bed 4.0L and will need tie rod ends soon. (Well ASAP!) Anyone got new take offs? Or where would the best deal be found? Thank you in advance, Rich (814) 535-1899 PA

 

trdparts4u.com

 

What tie rods are you looking for? Steering, Suspension, Sway bar, threaded ends, heimed ends with bungs to weld into a piece of tube? Need more info man.

 

i bought tie rod ends from them... they shipped quickly

 

amaes Not trying to cause any problems, but Suspension has BALL JOINTS, Anti-Sway bars have END LINK KITS not really sure what you are talking about. I'm just looking for the tie rod ends to a 2006 Tacoma Dbl Cab 4x4 Long bed TRD (I may need both Inners and outers for both sides.) See photo below: in this photo, upper Ball Joint is disconnected, End Link is disconnected, and outer Tie Rod End is disconnected. Outer Tie Rod end is on the bottom left. Mine are worn and I will need new ones soon. Thank you.

 

Ok I know what you are looking for now. I do fab and when you say tie rod end I was thinking things like this: http://www.polyperformance.com/shop/Rod-Ends-p-1-c-725.html
For the thing you are looking I'd do trd parts for you unless the auto parts store sells them.

I know Allpro and Total Chaos sell Beefy ones for your truck and they are heim joint ends

 

amaes, I checked out the website and see why you asked me about it. Thank you for the response. I'm currently looking at the www.trdparts4u.com site mentioned by solus694 I did buy my suspension and ARB front bumper from Toyota of Dallas, Texas (ie: www.trdparts4u.com)

 

dam it looks brand new what happened?

 

Well, that one only has 3000 miles on it and is not mine. I was just using it as example. I just put the OME 885 springs and OME Struts in this one. Mine is at 79,900 miles and is in need of some front end work. Also will be buying new tires in the near future. I do love the Discoverer STT's I have and will stick with them. I would like to buy a rear bumper and some sliders I have seen on TW, but I think for the costs, I may end up buying welding stuff and making my own. Here's mine: www.bigrubbers4x4.org




Cooper Discoverer STT 305/70/16 (33.1" x 12.3")