What Have You Done To Your 3rd Gen Today?

Had to share this, I know I posted earlier on the new vinyl emblems. But I was going thru some other pics on my phone and found these. Amazing the mirror image quality you can get with the mbm color and a fresh coat of wax

 

Got my USR switchback mirror turn signals installed today. Thanks to @r_to_the_k for info that helped with the install. Also added some puddle lights and got help from @PapaRee. Lots of great people here with tons of knowledge. All the help was much appreciated. I'm not great with wiring but manged to get everything done.

 

Very nice! Looks great! Glad you got it done. Happy to help.

 

Lift went on today

OME kit
SPC light racing UCAs
886 coils
Firm struts
Dakar HD leafs
Spidertrax 1.25 wheel spacers (will be running OR wheels for a while)
Looks like a whole different truck and I couldn’t be happier, 285/75 going on tomorrow

 

How much lift is that ?

 

Thanks Bud appreciate it

 

Installed a bed rack yesterday. Went to the store after work today and had to snap a picture.

 

From my rough measurements I gained a little over 3” front 2 3/4” rear. Up front I also added 1/4” spacer from Headstrong to minimize rake.

 

Nice. It looks good man!

 

Damn, 3” seems like a lot for 886’s. Post a pic after a while once they’ve settled.

 

Finished up my Victory 4x4 molle panel set up on my center console! Love it!

fyi there's a 10% off coupon code in the description of the video if interested

https://youtu.be/a-mmPlEUbT8

@monkeyevil

 

Yeah I added the 1/4” spacer also that added 1/2”. I’m sure it will drop down quite a bit once it’s settled up, hopefully not too much i will re measure once I notice it dropping

 

Good luck. I had 2 instances of dropping something in hidden places and luckily have recovered both times. Everything stops until I find it. The latest was a mini zip tie behind the dash the stealth pro shifter install took extra long

 

I feel the front cam auto on (below 10mph) is finicky on this beatsonic kit. It’s delayed response and it seems to have a default off after so many seconds- basically you can’t creep under 10mph for infinity before it’ll just turn off. So it turns on and cuts off regularly which is kind of annoying , especially when it cuts off before you’ve fully parked so I may end up just turning it off which is a shame because it was 1 reason for going with this kit.

Front cam quality seems richer and less grainy than the rear. Crime stoppers cam-400

 

Thanks. Never found them but I will resume the search tomorrow.

 

Can you share some tips on how to go about removing this panel, I want to relocate some switches also. Thanks in advance!

 

I didn’t remove the switch panel. First remove the shroud surrounding the radio by pulling outward and loosen the 4-10mm bolts for the audio unit. Next you can remove the HVAC controls by pulling outward. All those switches can be popped out from behind.

 

Which bed rack is this?

 

Well after a long day doing the install in my driveway. She is finally lifted!
Went old school with the white letter out. Procomp 6" lift, BFG KM2 35x12.5R18 on 18x10" Moto Metal M0970 wheels.
Waiting on my flares from 4WP.

 

Looks good!!!