U bolts for 1" rear blocks

I am putting Bilstein 5100's at all four corners. The fronts will be set at 1.75" so I'm adding 1" Supreme Suspensions - Rear Leveling blocks on the back. I bought them without U bolts because I have been reading about people having to cut and or modify the ones they send with these type of blocks (usually 10" U bolts). My question is what size bolts should I get and where might I get them? Thanks in advance, Ray

 

Rather than try to calculate the exact length needed, its easier to buy longer than stock U-bolts and then cut them to size.

 

That seem to be what people are doing. I'd rather get the right size but will cut if I can't find the right ones. Thanks

 

Have you considered measuring what's on it stock and adding 1 inch?

 

That's what I will do. I'm hoping someone here has done the same job and can direct me to where they got theirs.

 

Most rear block kits come with new u bolts. If not icon sells them for like $50 I think.

 

Thanks. I'll check them

 

You can get the length you need at Wheelers. Measure the stock u-bolts and add the inch for the block.

 

Stock is 8"' like said above wheelers has them.

 

Thanks Jeff