Ontario BS Thread

16 more messages to hit 1000!

Who is going to be the mayor @TeecoTaco

 

I’m prepared to hand over my 19k post Mayoral status. Didn’t know it would end so soon

 

My bet is he is referencing how much of an stud he is, has had 4 different hot chicks in the rig. Not at once.

Just a guess.

 

ah! if we are doing that, then I got a full 6ft wh#re bed, fits 25 ladies easy

 

Mobtown bolt ons, I know they have a lead time, but shipping was about $200US (they have their own shipping company arrangement) to Hamilton, they did the customs paperwork and pre-paid the duty fees so there was no border delay. It saved a bit because I had them shipped to a commercial address. Trucking companies charge more for resi addresses.

Frame flexes more than the sliders do... Lol



I got the standard 20 deg ones, except for the kickout they sit about 1-1.5" past the outer arc of the doors, perfect for most types of door ding protection too.
Works good as a step so you don't scratch the shit out of your door sills getting in and out but don't stick out far enough to get in the way when your leaving the truck.





I sat mine on a milk crate and then slid the crate under the truck, made them real easy to install.

The C channel wrap at the front and the clamps on the back flange as well as all the other usual through bolts to the frame etc really nail these things to the truck.

I have not jacked up the truck by just the kickout, but we did lift up the truck with a mechanics lift by the sliders in 4 spots and the sliders
-barely- moved,
it appeared that the frame caused more of the movement than the sliders flexing, lol but we were not climbing under or lift or lifting the truck more than a foot, just in case is slid off.
So seemed solid enough to me.

Sliders are worth it, no matter who you go with, Lol will even pay for themselves if you're a mall crawler from door dings alone.

 

How do those attach to the frame at the back, I see two holes there on where they go in the inside of the frame. Mobtown uses beam clamps there, maybe just adding a couple of those may help....

 

My guess;

All 4 transvestite midgets fit just fine, and he even had room for a case of beer.

 

Remove it and be done with it. I've done quick maneuvers and the truck feels fine.

 

I hear ya, I tell myself that then go to remove it and chicken out.

Think if I follow Dax's lead and take it off then do the moose test. Prove to myself it is good.

 

Crazy lol

I gutted mine so I dont even have to think about it. It's just me and the wife.

 

That is the image of mobtown sliders, the one I have can be seen below, absolutely no support at the back
https://rcimetalworks.com/product/2016-tacoma-rock-sliders/

 

I rarely ever use mine for people, but i like having the option. Even if everyone bitches about it

 

“Mayor.....Now that’s a great idea. I could run for mayor!” Goldie Wilson

 

Ahhh ok yeah I can see exactly now why you would have an issue.

2 pieces of angle iron to make a C channel to weld onto the sliders frame plate and wrap around the back of the frame to attach beam clamps like the Mobtown ones will fix those right up.

 

We

 

are

 

almost

 

1000!

 

Tred wanted me to pay lol

I said no they said if I give a review they'll send. So I did

 

are