What Have You Done To Your 3rd Gen Today?

Had the bilstien 5100s, 887 coils, SPC UCAs, and Dakar medium leaf pack installed. Leveled the truck out nice and rides great except for speed bumps. The front end has a heavy thud to it when going down the speed bump. Not sure if they just need to wear in and settle a bit or they were installed on the 5th notch which is not recommended for the access cab and I told the guys installing them not to do. Any one else have the same experience?

 

Installed an ARB Safari snorkel. Easier than I originally thought!

 

In b4 the flood, meso puddle lights.

 

Forgot to post before and after pics.

 

Got my @MESO stuff today too!!

 

Got my fob and mirror lights Tuesday. Bad ass addition for sure. Order more fobs and the gasshole. Lurking for the next puddles...

 

I took my gas cap tether off the other day and it seems to be easier putting the gas cap back on. Figured I didn't need the tether with a Gasshole.

 

here's one more. Sorry about the quality, poor lighting obviously. I tried getting a pic peering down into the ice room I mentioned before.

 

haha well I guess that will do it. But still, I cant stand how easily these things scratch/swirl.

 

not sure if that's true, but my wife had an '08 range rover up until a few months ago and those are made as much for off road ruggedness as they are luxary. Anyway, the remote key is completely water tight. Wasn't push to start but I don't see why Toyota couldn't do that.
On the other hand, my buddy used to have a Willy's Jeep. That thing was bare bones. No power windows on a 2018.

 

Nice looking truck. Can you tell me what you used to lift, what wheels, and what tires you have. Might just have to do this to my new truck.

Thanks

 

First mod on the new truck. Installed the "Plug-N-Play Harness & Tailgate Lock with Bolt-N-Lock Bracket & Rod by KTJO 4x4." Super easy and well worth the piece of mind knowing the tailgate is locked without having to use the key. Can't wait for my ditch and bumper lights to arrive, they were supposed to be here today but bad weather in KY delayed my shipment.

 

Have the same setup, 5100’s with the 887’s but haven’t upgraded the UCA’s yet. I get the same thud; believe it is stock UCA’s striking the coils.

 

Added a sonic rodent deterrent device since my rodent intrusion which cost me $1K on my deductible!

 

265/70R/16

 

https://youtu.be/qkaV_ihG4-U
This is the sonic rodent repellent in action!

 

Do the Meso puddle lights connect up to the dome light harness? Thinking of some other ideas for LED lighting in the cab and wanted to confirm where most are tapping into the harness.

 

Do you park in a garage? If so, I found out they tend to not hang out in open spaces. Had rodent problems on my other truck that sits during the winter. Started leaving hood up and haven't had a problem in years.

 

Unfortunately I park outside. Believe it happened when there was a pile of tree trimmings left near my truck. But the advice is very much appreciated!

 

Yes, there is a T connector that passes through the dome light harness.