What Have You Done To Your 3rd Gen Today?

First mod on the new truck. Installed the "Plug-N-Play Harness & Tailgate Lock with Bolt-N-Lock Bracket & Rod by KTJO 4x4." Super easy and well worth the piece of mind knowing the tailgate is locked without having to use the key. Can't wait for my ditch and bumper lights to arrive, they were supposed to be here today but bad weather in KY delayed my shipment.

 

Have the same setup, 5100’s with the 887’s but haven’t upgraded the UCA’s yet. I get the same thud; believe it is stock UCA’s striking the coils.

 

Added a sonic rodent deterrent device since my rodent intrusion which cost me $1K on my deductible!

 

265/70R/16

 

https://youtu.be/qkaV_ihG4-U
This is the sonic rodent repellent in action!

 

Do the Meso puddle lights connect up to the dome light harness? Thinking of some other ideas for LED lighting in the cab and wanted to confirm where most are tapping into the harness.

 

Do you park in a garage? If so, I found out they tend to not hang out in open spaces. Had rodent problems on my other truck that sits during the winter. Started leaving hood up and haven't had a problem in years.

 

Unfortunately I park outside. Believe it happened when there was a pile of tree trimmings left near my truck. But the advice is very much appreciated!

 

Yes, there is a T connector that passes through the dome light harness.

 

Mines not a metal on metal clunk it feels more of the springs are just shooting the tires down to the ground. Rattles you in the truck. I have to either go half mph over them or go at an angle to prevent it.

 

My tether is gone as well

 

Yeah, I’ve learned to just slow down going over speed bumps to prevent it.

 

I was thinking you were at the ice cave in Gifford Pinchot NF. Sounds like the one by you is a lot bigger though.

 

New V2 Meso designed Ultimate mirrors.
V1 Matte black no BSM

New color matched V2 with BSM

V1 puddles passenger side. New V2 drivers

And here's what that tiny little ditch light can do. Headlights are not on.

 

You will love them!

 

There’s a blue meany in the tree

 

Morimoto HIDs

 

I have no idea what that is. Will have to check it out in the daytime tomorrow.

 

I rinsed, washed and rinsed again my floor mats. They were very dirty because of the rain for the last 10 days. Thus, I'd step on mud every night leaving work.

 

Front: 3rd gen 5100’s set at 0 w/ toytec 2.5” coils & added the 1/2” spacer to get a 3” lift. 1/4” spacer on the driver’s side to get rid of the taco lean.
Rear: 5100’s w/ single AAL (not sure on the brand) & kept the overload.