What Have You Done To Your 3rd Gen Today?

Thanks for the info, definitely going with this for my next tire.

 

Has anyone installed SumoSprings(Part #

$283 SSR-612-40 | SumoSprings Rear for Toyota Tacoma, blue

SSR-612-40/47) instead of adding extra leaf springs?

 

Every time I see a cement grey, I get the urge to trade mine in for that same color.

 

Did my rear diff breather mod today, tucked it up behind the taillight like I’ve seen others do.

 

I have used these in the past and they work good for heavy loads. I installed a set for a friend 3 years ago, he has a large sprinter van and he carries probably 5k lbs more than he should and they have held up great and are still going strong.

 

Btw, the ones I used were black in color, I also installed the most heavy duty ones they sell for the sprinter van. Probably won’t work very good Offroad because you will have less up travel, that’s the only reason I ended up taking mine out.

 

Painted rusty drums and weighted the wheels probably shouldn’t have now I’m buying Volks lol

 

Price and what sort of installation process ?

 

There are a lot of remedies home made I believe Cayanne pepper works pretty well. those rodents could be pretty nasty I see rodent damage at least once or twice a month and it’s typically 7 to 10 grand of damage almost every single time

 

Thus I’m sticking to my 33.2” 285s on 16x8.

 

But they will get as close to it as ever.

 

That’s good and all but try taking your swaybar off, shouldn’t take more than 10 mins. All you need is a 12mm,14mm,17mm. That front tire goes a lot further up in the wheel well.

 

That was meant for the guy you quoted. (Greg’s)

 

Taco got some upgrades
Icon stage 4s
17x9 ray10s
285/70/17 ridge grapplers

 

Great looking truck!!

 

Sweet looking Tacoma!!

 

Nice man

 

it came with a 3 n 1 spacer block setup from the dealership. Eventually I'll be putting in upgraded suspension to get around 2+" with Dakar medium leaf pack replacing the stock set.

 

did you add 1/2" top spacers in addition to the 1/4" driver side?

 

I hear ya, went with the weight savings and tire selection of the SCS 17s (54#'s just in the four on the axle... haven't weighed the stock spare, which got swapped for a matching wheel/tire).