South Carolina BS thread under new MANAGEMENT and lives in SC

For the Chevy!?! Pimp!

 

Nah for the taco

 

Got both sides of the house seeded and straw down. Filled in some patch spots in the front and then seeded and got the straw down in the back. Another project off the list. Now it’s time for beer and water.

 

That's a good deal.. I finally got my wife to call me.back and as women do .. made arrangements for someone to come and pet sit for us.. .. I do appreciate everything though

 

I just went through the same thing....I hired someone to fix it, but I did follow him around to learn how my system works.

You need to find the relays and valves, that by itself was worth what I paid, mine had become completely buried by a 2” of dirt and grass. If you can find that try to manually turn on the valves. If the heads pop up the problem is either wiring or the relays. Command it on at the box and check each relay to see if it’s getting power. If yes, then you have a bad relay, if no, then it’s either the controller or the wiring. Mine had a break in the wire.

And....yes the disconnected blue wire looks suspicious. I’d try connecting it to one of the zones and see if that fixes anything.

 

Paul McCartney traffic.

 

Yikes... I hate sitting in traffic ...

 

The reason I moved from ATL to Clinton ...
hahahahaha

 

Ahhhh yes, wives...may God help all husbands, haha. No worries though, just looking out for fellow fur-parents.

 

Well I appreciate it

 

@SOS CONCEPTS how hard would it be to do CMC while I'm down picking up my bumper?.. I'm wanting 255/85s but last time I thought about it Adam was saying I might rub ...

 

Hard. And if you rubbing on pizza cutters. Something else is wrong. Hard meaning $250 and two hrs lol

 

Okay I probably will get the tires and then take a look at it.

 

As far as a winch.. I know you had said a smittybilt... Do you have a link of where everyone has purchased ?

 

Are you using a set of factory 16" wheels? I know that the 2nd gen OR wheels have a +30 offset/~5.18" backspace and w/ the width of that size tire you'll actually gain +/-0.25" (depends on the specific tire in that size) clearance from the suspension without wheel spacers. However, a 1/2"+ wheel spacer wouldn't hurt either. So, you shouldn't have any issues and if you do then you've got something else going on like @SOS CONCEPTS said. Now I don't know what your situation is but if you're in need of a set of 16" OR's, I have a full set with matching spare, sensors and tires that I wouldn't mind parting with. Oh, plus a good alignment will certainly help.

 

Are you a salesman for a living? Cuz you almost made me want to buy a set of off-road wheels from you lol. No I have konig countersteer they are 0 mm off set and 4.5 backspace

 

Naaah, just a good ol boy looking out for the community who's helped him in the past.

 

I'm not a salesman either I'm a service tech but the salesman I work with Will turn that around and I also have this in stock so you go and get it it's just pretty funny it made me think that you are a salesman. No I really do appreciate it although I'm not quite sure what 255/85 would do all my truck on stock wheels or if what I have is better for the pizza cutters