Ontario BS Thread

Nice...I like the diamondback, if I did it again tho

 

it’s cool, but limits bed space, doesn’t open all the way, so had to go another route. Now need to submerge taco 10ft below the sea level and see if it leaks in the bed

 

Can i see a side photo of all the flaps up? i heard the MX4s lean up against the cabin of the truck, just wondering if that's true

Edit: like this(this one is by undercover), idk why but my google-fu has failed to show a photo of the mx4 in the upright position on a Tacoma

 

mine flips like this and I had to attach those 3 bumpers to avoid hitting the cab

 

I dunno man...not sure I likey. Kinda covers the rear window stickers.

 

Are you saying you can still see your Save the Whales sticker when it's flipped up like that?

 

ooooh so the rubber bumper is what protects the truck itself, neat!
good to know that's the case since i was a bit skeptical about the mx4. that cleared things up

 

Make sure you seal them
They leak like a hoar

 

Might be a bit late, but when drilling the drain holes in the bed, careful with the driver's side one as people have knicked/drilled into the gas filler pipe. I remember reading that here on; Trollcoma World.

 

An excuse to collect more stickers!!

 

That was me





Used a stepper drill to get it to the size i wanted, factory is a bit small for the amount of water that retained inside the bed (there was crap clogging the holes up), and i accidentally pierced the top of the fill hose. Toyota covered it under warranty but that was because no one knew what the hell was going on. It took a few days before i realized what i had done and that it was my fault ....

It was punctured for at least a week since i had a full tank of gas when i did drilled the hole larger. Gas only dumped out when you try to fill it... that was when i learned about it.

You will not see a check engine light until the valve opens up further down the tube
that's when the confuser will realize the leak.

@Norilsk don't be like me, don't drill into the fill hose.

Edit: thanks to google images saving my photos and time stamps; got the cover on June 16,2018 - drilled the hole on the 23rd, found the hole on the 28th.

 

When my cover is up, i show off my cool velcro patches


I intend to pick up; https://tacticaloutfitters.net/products/pre-order-world-record-largest-morale-patch-at4
because why the fuck not


also don't look into the bed of the truck at that garbage, i swear it's clean now
found a little fold up box to use as a trash bin.

 

Ouch Lol, K well it wasn't even your post I was thinking about, so don't feel bad your not the only one to do it then.

Glad I put my cover on in the winter and said F' it for putting in the drains cause there was still snow in the bed.
I had the step bit in my hand and said, naw I'll wait till the snow melts out, or I would have done the exact same thing. Procrastination and lazyness saved my ass.

LOL still have not installed the drains in my cover yet... been almost 2 years.

 

We didn't notice your water bottle Meth pipes. No judgements by this crew....

 

oh thank fuck i'm not the only idiot!
you're lucky to be as lazy as you are you don't need those holes

Now the rest of Ontario knows 99% of Hamiltonians you let out our secret. Time to get the dirty needles out and leave them on the sidewalks

 

https://thereefco.bigcartel.com/product/1-to-1-scaled-reef-aim9x-pre-order

 

what the actual fuck

I NEED IT.

 

I figured you just drove down Barton St on a windy day, blew in just like leaves.

Buddy of mine used to live near Barton and Victoria... Alley behind his house had more meth pipes, needles and hookers than leaves LOL

Driving to work one day his bed cover flips up on the highway and some bum stuck his head out... Lol

 

Yeah, probably late I am going to take a look later in the day. Worst case JB weld or PL glue lol, I practiced a lot on my 93 pickup fixing holes in gas tank not long ago.