RRW Bolt-On Rock Sliders | 2016 - 2019 Toyota Tacoma (DCSB & DCLB) | Promo Code: SlidersRH

Goin to get them bed lined

 

Back !

 

Still waiting for these to go back to $650.

 

Same, need some now....

 

Dang is be all over that

 

Finally got mine after 6 mons of waiting. I installed mine last 2 weeks ago. I took it to the trail yesterday and I’ve notice that my slider is hitting my lower part of my truck bed when I hit a bumps on the trail. Just wondering if you guys experiencing this too and what solution did you do. Thinking of putting a rubber to lessen the noise every time it hits but I’m also worried it might break or crack my bottom of my bed truck.

 

Has it caused any damage yet?

 

So far not yet but it’s a loud noise when it hits

 

That's what I need to do. What is bedlining running these days costwise? My sliders have all sorts of light scratches on the powder coating all overover that's not even from anything strenuous. Just from stepping on them.

 

No hitting the body here and that's hitting about 10 rough trails and running them since last fall.

 

I am so confused as to why, with so many issues shown, people would still buy these if they went down to $650 again. Why not pony up a few extra $ and get something else?

 

Got em line xed for 200 I dropped them off , they called back in 2 hrs already done

Scratch that it is was $250 found the receipt

 

You need to contact @RayRRW and/or the customer service guy Michael so they're aware of it. Posting here is a start but you should PM or email them and get a conversation started.

That makes 7 of 17 now that have posted here... no updates from anyone on what's being done to correct the issue at this time.

@JP_Rain - sliders make contact with cab, incomplete welds with holes, insta-rust
@JonesMGMOR - sliders make contact with cab
@dunkshaw - sliders make contact with cab (was able to adjust with force)
@Lonelyshadow - sliders make contact with cab, incomplete welds with holes, insta-rust & step plate welded on upside down
@vegangunguy - sliders make contact with cab (was able to adjust with bracket placement)
@Longv - incomplete welds with holes, insta-rust
@IzzyTacoG3 - sliders make contact with cab

 

Well I was looking to pick up a set of sliders from these guys this week but I’m gonna pass now. Thanks to everyone for their posts

 

I did email I even asked what’s the proper way of installing it since I didn’t wanna drill at first but no response.

 

Alright Guys.. Here we go..
I ordered mine along time ago.. Finally got them in April.. I put them on and the drive side was smashing the pinch weld in three different places.. I reached out and Mike replied to me. The OG drivers slider was the test fit one and the angles were all off and much different than the passenger side. The passenger side slider does not have the angled piece from the back to the support.. its just missing.. After some time they sent me a new drivers side slider... and guess what... this one is hitting the pinch weld too.... So now I do not know what to do... They were installed via instructions.. I have to weld on my own piece to the passengers side and repaint it.. bend or grind down the pinch weld under the drives side.. They are beefy and can take a hit but its annoying every bump i hit in the road i can hear.. So thats my update....

 

Installed mine today Yup hitting pinch weld as well. I tried every which way with the bracket tightened every which way. They ll do for right now ,might try shimming them... , since no one is hearing a damn word from rrw

 

Mine is only hitting a small piece of the pinch weld. I might just bent it a touch to get it out of the way...

 

Pm'd

 

Can you Pm me more pictures?