What Have You Done To Your 2nd Gen Tacoma Today?

Really? Inside or outside with the steel wool?

 

CaliRaisedLed 25 degree rock sliders coming in on Monday. So Excited!!

 

1up

 

Those are awesome. Pricey but worth it, IMO. I built dual mounts for two of those on a customer's over Softopper bedrack (which I also made).

 

I think the hardware and cut pieces make it worth it, small details that stand out over the mounts I’ve had in the past

You got any photos of your mount? I bought two and debating of mounting the second on the truck or putting it on the daily

 

Fixing it up as a beach buggy. Added the top roof rack. Those 1 1/4 in inch polls have 1 inch inside of them. They slide out and connect to our 10x10 tent. Zip tie them on the beach they ain't going any where just have to tie the other two down. Wood on the top is going to be my rod rack. I don't care for the rods sticking 13 foot in the air. Never impressed me so fixed it where they can lay down and point forward. Rear view camera, and have to mount the rear pointed Light bar tomorrow. Starting on the inside the camper top tomorrow . Rain all weekend think it might be finished by Sunday.

 

Got tired of the local chipmunk putting nuts in my cabin filter/blower area. Said F you today.

 

Installed Toytec swaybar relocation brackets



When does it end?

 

I wouldn't consider a relocation. More like a spacer.

Any thoughts

 

Definitely moves the sway bar location forward

 

Probably because you stripped them by over tightening them? Throw some loctite in there, lube them up to be sure the bushings take the grease and call it good?

 

Did this yesterday. As well as changed the oil, rear diff, and t-case oil. Today I made some different brackets for the rock lights at the back of the cab/in front of the rear tires. We'll see how the spill is now. Ordered a set of 4 more to add to it.


This is the one I changed up

 

I didn't over tighten them. They are not stripped.
I had to tap the holes because of the powder coat. I couldn't even start the threads, and yes I used the right size tap.

 

Outside

 

Installed new shifter surround and the position indicator (says PRND32L).

 

Just recently did a Cab Mount Chop and Weld to stuff in some 33x12.50's
Drove 2 weeks without the CMC but eventually did it! on a 2.5" Lift.

 

Do you have plates to weld in place?

 

Yes Sorry,
The Second Pic has the Total Chaos plates welded in (accidentally posted it second instead of last).

 

Picked up a customer returned Coverking neoprene seat covers front row for $3 and installed them. They’re for a 2011 so it’s not perfect but good enough


They’ve got cutouts for lumbar adjustment and airbags which I don’t have

 

EAF YO
Also added a new patch. A few people might recognize it