MESO Puddle Light build

This helps me so much. I couldnt figure out what the heck this came off of

 

To get the boot out or wires through?

 

Both lol, my small hands pulled the boot out manually, but fishing a wire through with the meso and attached and some soapy water made the lass through stupid simple.

 

Puddles installed and looking good!

 

I taped a long black zip tie an used a dab of lube to get it through .

 

All this info is good field feedback for what the next kits will need to be tweaked. I’m going to include a bright green super large zip tie to help with installation. And so you can’t lose it

 

Ok so to recap to make sure im doing this right.

Both pods are installed.

There is a wire that fixes to the driver light that feeds into the passenger side and an identical shorter wire that comes from the passenger light into the cab.

I still have a large t harness and a y split connector not installed yet, does this sound right?

Sorry im dumb at this, i appreciate the help alot!

 

Sounds about right. You don't need to remove the bolts for the lower dash. Not quite sure why that was in there. I used a fishtape to get the cable up to the pillar, but a stiff wire would work fine.

 

I put the long wire on the driver side when it should be on the passenger

 

On another note, @MESO, you mentioned the possibility of filter covers. Still thinking of doing those?

 

No way, don’t believe it

 

I feel for you bro. Little set back. However you know how it’s goes, just takes some time now. Do what I did when I got frustrated, stepped away, kiss your lady and go back and finish it.

If that isn’t some good advise idk what is.
Or if you don’t have a lady, kiss your dog.... if you don’t have a dog, fuck it, go make out with a mirror. You’re beautiful

 

I had to rub one out after I stabbed myself with a pic trying to get the window switch plug out on drivers side . Wouldn’t come out . Now it’s dark so here comes some pics

 

Perfect in my opinion .

 

Just a quick visual. Sorry only dash pic I have. Yellow is the long wire and goes behind the dash and up the A-pillar. Red is short and goes to same spot. They plug into the splitter.

 

Here is a Promo video of the Puddle Pods I made for Meso Customs. Install video coming soon.
https://youtu.be/srnpageQDD8

 

Yup! Im a dumb dumb, mines backwards. Longest install ever lol

 

Maybe I should label them driver and passenger..

 

It’s all good man, shit happens. It will be all worth it in the end.

 

Green and orange or something tape at each end would be helpful for people like me it seems