Will this cap fit my Tacoma?

Hi all, I found a used contractor cap online but its currently installed on a Mazda. It measures 61 x 76 inches. The brand is a Raider RCC/75R "23" model 1882511. Its a nice cap but I currently have one installed on my trick and I would hate to take mine off just to find out if it will fit. The Raider site is pretty useless when looking for this info. Would anyone here know if it fits? BTW I have a 2012 Tacoma TRD 4 door with a 6foot box.

 

Have him send you measurements and then see.

 

It measures 61 x 76 inches and this seems like it would fit but I'm not 100% sure.

 

It may fit but it'll not match the angle of the cab & probably not bed height.
Will it fit? Maybe.
Will it look good? No.

 

Its a contactor cap, Im not too concerned about the height. I just want it to seal properly on the bed rails.

 

Tape measure.

 

Are the Tacoma gen 2 bed rails 76" long?

 

Not if you want a perfect fit. The Tacoma bed is about 3-4 inches wider and 2" longer than a Mazda bed(based on a 2011 Mazda)

 

The Tacoma bed is also tapered. Make sure to measure front and rear.