What Have You Done To Your 2nd Gen Tacoma Today?

Totally i agree. What have you replaced? Ive chased this knock for years and ive replaced:
Outer Tie rods, inner tie rods, upper control arms, power steering rack, lower steering shaft, upper steering shaft, change wheels nand tires, went to balance beads instead of static, cv axles, drive shaft ujoints, carrier bearing...
You can grab my steering wheel with two fingers and easily wiggle it. My dad had an 07 base modle 4wd and his didnt do that.

Id be pissed if mine did what you describe yours doing

 

I donthe same, wash a spot and rinse it before the water dries.

Ive got ULTRA hard water from the hose and if you let it dry you get visible deposits of calcium [or some poison] everywhere. You have to razorblade them off the glass...

 

Christmas in June!

 

You could get it with the trd supercharger as an option.

 

i like that design! When are you putting them on? Merry june_Chriatmas!

 

Damn... I ain't got anything like that but I've always done sections to keep off water spots in general.

 

Ahh... ok I thought it came on them as part of the xrunner package.
Why didn't you get one from the start?

 

Mine got a face lift. eBay TRD Pro grill. Painted the chrome bezel with a flat black texture. Not 100% happy with it so I’ll probably strip it and do a smooth flat black.
$123 shipped for this bad boy and it fits damn near perfectly.

 

I bought it used, I should of bought a new one but I missed the chance in 2015.

 

I think sometimes I should've gotten a v6 but then I love the torque value my 4 popper has. Keeps me from speeding as much that for sure. It's like driving a tractor everyday... LOVE IT!

 

I'll try to put them on this weekend, if i finish painting them on time. I haven't seen any videos of an install on a 2nd gen taco so also try to make a video to post on youtube.

 

Ordered rear bump stops to replace the ones cut off for airbags by previous owner. You would think to be certified it would come with those. One job guys.

 

Nice. Do you have a link to these?

 

Just slapped my antenna on. Looks outta place but it works for now. Gotta finish up wiring cb radio & light bar. Had to stop halfway through due to rain. Too many beers to trust my self wiring anything now that's rains stopped.
Extra 3rd photo to show how I mounted. Used a 90* bent piece of metal w/ pre drilled holes that I got for $2 (bought 2). Primed & painted it. Then ordered the famous t nuts & bam! The washers behind the bracket are being used as spacers.

 

I'd love to see the video too. Link it in here

 

https://www.tacomaworld.com/threads/fs-waterproof-under-bed-rail-led-lights.253004/

 

Where did you get power and where did you install the switch?

 

The only way to connect a front camera is to buy a $100 switching unit?? I cant splice some wires and push the signal from the new camera to the HU?

 

I like the way you think!

 

Put bigger tires on it. Went from a 33” E load to a 35” D load. These drove great so far! And No rubbing on my way home from the shop.